11117797932 – BMW End Cover with Gasket Installation and Maintenance Guide

The BMW End Cover with Gasket (part number 11117797932) is a crucial component designed to seal the balance shaft journal, located above the oil pan. This part ensures the proper functioning of the engine by preventing oil leaks and maintaining optimal pressure. Its high-quality construction guarantees durability and reliability, contributing to the overall performance and longevity of BMW vehicles.

Specifications

Specifications for BMW End Cover with Gasket (Part Number: 11117797932):

• Dimensions: Not explicitly listed.
• Materials: High-quality materials ensuring durability and reliability.
• Compatibility:
  • BMW 228i xDrive Gran Coupe (F44): 2020
  • BMW 230i Convertible (F23), Coupe (F22): 2017-2020
  • BMW 230i xDrive Convertible (F23), Coupe (F22): 2017-2020
  • BMW 328d Sedan (F30): 2014-2018
  • BMW 328d xDrive Sedan (F30), Wagon (F31): 2014-2018
  • BMW 330e Sedan (F30): 2016-2018
  • BMW 330i Sedan (F30), Sedan (G20): 2017-2020
  • BMW 330i GT xDrive (F34): 2017-2019
  • BMW 330i xDrive Sedan (F30), Sedan (G20), Wagon (F31): 2017-2020
  • BMW 430i Convertible (F33), Coupe (F32): 2017-2020
  • BMW 430i xDrive Convertible (F33), Coupe (F32): 2017-2020
  • BMW 530i: 2017-2020
  • BMW X1: 2016-2020
  • BMW X3: 2015-2020
  • BMW Z4: 2019-2020.

Installation Process

Sure, here’s the step-by-step installation process for the BMW end cover with gasket (part number 11117797932):

1. Preparation:

   • Ensure the engine is cool and the vehicle is on a flat surface.
   • Gather necessary tools: socket set, torque wrench, gasket scraper, and a sealant (if specified by BMW).

2. Remove the Old End Cover:

   • Disconnect the battery to avoid any electrical issues.
   • Drain the engine oil to prevent spills.
   • Locate the end cover and remove any components obstructing access (e.g., turbo pipes).
   • Use the socket set to remove the bolts securing the end cover.
   • Carefully pry off the old end cover using a gasket scraper.

3. Clean the Surface:

   • Thoroughly clean the mating surface on the engine block to remove any old gasket material and debris.
   • Ensure the surface is dry and free of oil.

4. Install the New Gasket and End Cover:

   • Apply a thin layer of sealant if recommended by BMW.
   • Position the new gasket on the end cover.
   • Align the end cover with the engine block and press it into place.
   • Insert and hand-tighten the bolts to hold the cover in position.

5. Torque the Bolts:

   • Use a torque wrench to tighten the bolts to the specified torque setting in a crisscross pattern to ensure even pressure.

6. Reassemble and Refill:

   • Reattach any components removed earlier.
   • Refill the engine with oil.
   • Reconnect the battery.

7. Final Checks:

   • Start the engine and check for any leaks.
   • Ensure the engine runs smoothly and there are no unusual noises.

Special Tools/Precautions:

• Torque Wrench: Essential for ensuring bolts are tightened to the correct specification.
• Sealant: Use only if specified by BMW to ensure a proper seal.
• Gasket Scraper: To remove old gasket material without damaging the mating surface.

Always refer to the vehicle’s service manual for specific details and torque settings. If unsure, consult a professional mechanic.

Benefits

The BMW part end cover with gasket (11117797932) offers several benefits:

1. Enhanced Engine Performance: Ensures a tight seal, preventing oil leaks and maintaining optimal oil pressure.
2. Improved Longevity: Made from durable materials, it withstands high temperatures and pressures, reducing wear and tear.
3. Reliability: Genuine BMW part, rigorously tested for quality and functionality.
4. Compatibility: Designed to fit specific BMW models perfectly, ensuring seamless integration.

Maintenance Tips

Here are some maintenance tips for the BMW end cover with gasket (part number 11117797932):

1. Regular Inspection: Check for any signs of leaks or damage around the end cover and gasket. Look for oil stains or residue.
2. Proper Installation: Ensure the gasket is properly seated and the end cover is securely fastened. Use the recommended torque settings.
3. Sealant Use: If specified by BMW, apply the appropriate sealant to prevent leaks. Avoid using excessive sealant which can cause blockages.
4. Clean Surfaces: Before installation, clean the mating surfaces to remove any old gasket material or debris.
5. Oil Changes: Regularly change the engine oil and filter to maintain optimal engine performance and reduce wear on the gasket.
6. Avoid Overheating: Ensure the engine cooling system is functioning properly to prevent overheating, which can damage the gasket.
7. Professional Service: Have the end cover and gasket inspected and serviced by a professional mechanic during routine maintenance checks.

Following these tips can help ensure the longevity and performance of your BMW’s end cover with gasket.

The BMW End Cover with Gasket

The BMW End Cover with Gasket (part number 11117797932) is a crucial component that seals the balance shaft journal, preventing oil leaks and ensuring optimal engine pressure.

It’s made from high-quality materials for durability and reliability, contributing to overall vehicle performance and longevity. The part is compatible with various BMW models, including the 228i xDrive Gran Coupe, 230i Convertible, and X3.

Installation Process

1. Preparation: Ensure you have all necessary tools and materials before starting the installation process.
2. Removing the old end cover: Use a specialized tool to remove the old end cover, taking care not to damage any surrounding components.
3. Cleaning the surface: Thoroughly clean the surface where the new end cover will be installed to ensure a proper seal.
4. Installing the new gasket and end cover: Apply a thin layer of sealant to the new gasket and carefully install it onto the engine block, followed by the new end cover.
5. Torquing the bolts: Use a torque wrench to tighten the bolts in a star pattern to ensure even pressure.
6. Reassembling: Reattach any components that were removed during the installation process.
7. Final checks: Inspect the installation for any signs of leaks or improper fitment.

Special tools like a torque wrench and sealant are required for proper installation. Regular inspection, proper installation, and maintenance tips such as regular oil changes and avoiding overheating can help ensure the longevity and performance of the BMW End Cover with Gasket.