11367585425 – BMW Solenoid Valve (SOLV) Repair and Maintenance Guide

The BMW solenoid valve (part number 11367585425) plays a crucial role in the vehicle’s engine management system. It helps regulate the flow of oil to various engine components, ensuring optimal performance and efficiency. This valve is essential for maintaining the precise timing and operation of the engine, contributing to the overall reliability and longevity of BMW vehicles.

Specifications

I couldn’t find specific details for the BMW solenoid valve part number 11367585425. However, solenoid valves typically have the following specifications:

• Dimensions: Vary depending on the specific application, but generally compact.
• Weight: Usually lightweight, often less than 1 kg.
• Material: Commonly made from durable materials like stainless steel, brass, or high-grade plastic.

For precise information, I recommend checking the official BMW parts catalog or contacting a BMW dealership.

Compatibility

Here are the BMW models and years compatible with the solenoid valve (SOLV) 11367585425:

• 1 Series: 2008-2013 (128i), 2011 (1 Series M), 2008-2010 (135i)
• 3 Series: 2006-2011 (323i, 325i, 325xi, 328i, 328i xDrive, 328xi, 330i, 335d, 335i, 335i xDrive, 335is)
• 5 Series: 2011-2016 (528i, 535i, 535i GT, 535i GT xDrive, 535i xDrive)
• 7 Series: 2011-2012 (740i, 740Li)
• X Series: 2007-2013 (X3), 2007-2010 (X5), 2011-2012 (X3 xDrive28i, X3 xDrive35i)
• Z4: 2011-2016 (sDrive30i, sDrive35i, sDrive35is)

Installation Process

Sure, here’s a step-by-step guide for installing the BMW solenoid valve (part number 11367585425):

1. Preparation:

   • Ensure the vehicle is parked on a flat surface.
   • Disconnect the battery to avoid any electrical issues.

2. Access the Valve:

   • Locate the solenoid valve in the engine bay. It is usually near the engine’s intake manifold.
   • Remove any components obstructing access to the valve, such as the engine cover or air intake duct.

3. Remove the Old Valve:

   • Disconnect the electrical connector from the solenoid valve.
   • Use a wrench to remove the bolts securing the valve.
   • Carefully remove the old valve from its position.

4. Install the New Valve:

   • Place the new solenoid valve in the same position as the old one.
   • Secure it with the bolts and tighten them with a wrench.
   • Reconnect the electrical connector to the new valve.

5. Reassemble:

   • Reinstall any components that were removed to access the valve.
   • Ensure everything is securely in place.

6. Reconnect the Battery:

   • Reconnect the vehicle’s battery.
   • Start the engine to check if the new valve is functioning correctly.

7. Final Check:

   • Look for any leaks or issues around the newly installed valve.
   • Test drive the vehicle to ensure everything is working properly.

If you encounter any issues or are unsure about any step, it’s always a good idea to consult a professional mechanic.

Common Issues and Troubleshooting

Here are some common issues with the solenoid valve (SOLV)|11367585425 and troubleshooting tips:

1. Valve Not Opening or Closing Properly:

   • Cause: Electrical issues, debris, or damaged parts.
   • Troubleshooting: Check the power supply and ensure the voltage matches the valve specifications. Clean the valve and replace any damaged components.

2. Leaking Valve:

   • Cause: Worn seals or loose connections.
   • Troubleshooting: Inspect for visible leaks, tighten connections, and replace damaged seals.

3. Erratic Operation:

   • Cause: Electrical connection issues or mechanical obstructions.
   • Troubleshooting: Examine electrical connections for loose or corroded wires. Test the solenoid coil for continuity and ensure the valve is free from obstructions.

4. Burnt Coil:

   • Cause: Overheating or incorrect voltage.
   • Troubleshooting: Ensure the power supply matches the valve’s voltage requirements. Replace the burnt coil.

5. Low Flow or No Flow:

   • Cause: Blockages or incorrect pressure.
   • Troubleshooting: Check for blockages and clean the valve. Verify that the pressure is within the valve’s operating range.

Regular maintenance, such as cleaning and inspecting the valve, can help prevent these issues. If problems persist, consult the manufacturer’s documentation or seek professional assistance.

Maintenance Tips

Here are some maintenance tips for the BMW solenoid valve (part number 11367585425):

1. Regular Cleaning: Periodically remove and clean the solenoid valve to prevent oil and debris buildup. Use a suitable cleaner to ensure no residue is left behind.
2. Oil Changes: Maintain regular oil changes using high-quality oil to prevent contaminants from affecting the solenoid valve’s performance.
3. Check for Fault Codes: Regularly scan for engine fault codes. Address any issues related to the VANOS system promptly to avoid further damage.
4. Inspect Seals and Gaskets: Ensure that the seals and gaskets around the solenoid valve are intact and not leaking. Replace them if necessary.
5. Avoid Overheating: Keep the engine from overheating by maintaining the cooling system. Overheating can damage the solenoid valve and other engine components.
6. Use Genuine Parts: Always use genuine BMW parts for replacements to ensure compatibility and longevity.

Following these tips can help keep your solenoid valve in optimal condition and extend its lifespan.

The BMW Solenoid Valve: A Crucial Component for Optimal Engine Performance

The BMW solenoid valve (part number 11367585425) is crucial for regulating oil flow to engine components, ensuring optimal performance and efficiency. It plays a vital role in maintaining precise timing and operation of the engine, contributing to overall reliability and longevity of BMW vehicles.

The valve typically has compact dimensions, lightweight design, and durable materials like stainless steel or high-grade plastic. For specific information, it’s recommended to check the official BMW parts catalog or contact a dealership.

The solenoid valve is compatible with various BMW models, including 1 Series, 3 Series, 5 Series, 7 Series, X Series, and Z4.

Regular maintenance, such as cleaning and inspecting the valve, can help prevent issues like low flow, no flow, erratic operation, burnt coil, or leaking valve. Using genuine parts and following proper installation procedures are also essential for maintaining the solenoid valve’s performance and longevity.