11428507697 – BMW Genuine Oil Filter for 2014-2018 Models

The BMW Oil Filter (part number 11428507697) is a crucial component designed to maintain engine health by filtering out contaminants from the oil. This genuine BMW part ensures optimal performance and longevity for specific models, including the 2014-2018 BMW 328d, 2014-2016 BMW 535d, and 2014-2018 BMW X5. Using this high-quality oil filter helps keep your BMW running smoothly and efficiently.

Specifications

BMW Oil Filter (Part Number: 11428507697)

• Dimensions: Specific dimensions are not provided in the available sources.
• Materials: Made from high-quality materials to ensure durability and performance.
• Compatibility:
  • 2014-2018 BMW 328d Sedan (F30)
  • 2014-2018 BMW 328d xDrive Sedan (F30), Wagon (F31)
  • 2014-2016 BMW 535d Sedan (F10)
  • 2014-2016 BMW 535d xDrive Sedan (F10)
  • 2015 BMW 740Ld xDrive Sedan (F02)
  • 2015-2017 BMW X3 xDrive28d (F25)
  • 2014-2018 BMW X5 xDrive35d (F15).

Installation Process

Here’s a step-by-step guide to installing the BMW oil filter (part number 11428507697):

1. Preparation:

   • Ensure the engine is cool.
   • Gather necessary tools: socket wrench, oil filter wrench, drain pan, and new oil filter.

2. Locate the Oil Filter Housing:

   • Open the hood and locate the oil filter housing. It’s typically on the top or side of the engine.

3. Drain the Old Oil:

   • Place the drain pan under the oil drain plug.
   • Remove the drain plug with a socket wrench and let the oil drain completely.

4. Remove the Old Oil Filter:

   • Use the oil filter wrench to loosen and remove the old oil filter from the housing.
   • Be careful as some oil may still be inside the filter.

5. Install the New Oil Filter:

   • Apply a small amount of new oil to the rubber gasket on the new filter.
   • Screw the new filter into the housing by hand until it’s snug, then tighten it with the oil filter wrench.

6. Replace the Drain Plug:

   • Once the oil has fully drained, replace and tighten the drain plug.

7. Refill with New Oil:

   • Remove the oil filler cap on top of the engine.
   • Pour in the recommended amount and type of new oil for your BMW model.

8. Check for Leaks:

   • Start the engine and let it run for a few minutes.
   • Check around the oil filter and drain plug for any leaks.

9. Dispose of Old Oil and Filter:

   • Properly dispose of the old oil and filter according to local regulations.

10. Close the Hood:

    • Ensure everything is secure and close the hood.

And you’re done!

Maintenance Tips

Here are some maintenance tips for the BMW oil filter (part number 11428507697):

1. Regular Oil Changes: Change the oil and oil filter at the intervals recommended by BMW, typically every 10,000 to 15,000 kilometers.
2. Use Quality Oil: Always use high-quality, BMW-approved engine oil to ensure optimal performance and longevity.
3. Inspect for Leaks: Regularly check the oil filter housing and surrounding areas for any signs of oil leaks.
4. Proper Installation: Ensure the oil filter is installed correctly and securely to prevent leaks and ensure proper filtration.
5. Clean Surrounding Area: Keep the area around the oil filter clean to prevent dirt and debris from entering the engine during oil changes.
6. Replace O-Rings: Always replace the O-rings and gaskets when changing the oil filter to maintain a proper seal.

Following these tips will help maintain the performance and longevity of your BMW’s oil filter.

Common Issues and Solutions

Here are some common issues with the BMW oil filter part 11428507697 and practical solutions:

1. Oil Leaks:

   • Issue: The oil filter housing gasket can wear out, leading to oil leaks.
   • Solution: Replace the gasket regularly and ensure it’s properly seated during installation.

2. Clogging:

   • Issue: The oil filter can become clogged with debris over time, reducing oil flow.
   • Solution: Change the oil filter at recommended intervals and use high-quality oil to minimize debris.

3. Cracks in Housing:

   • Issue: The plastic housing can crack due to heat and pressure.
   • Solution: Inspect the housing during oil changes and replace it if any cracks are found.

4. Improper Installation:

   • Issue: Incorrect installation can cause leaks or poor performance.
   • Solution: Follow the manufacturer’s installation instructions carefully and use the correct tools.

5. Compatibility Issues:

   • Issue: Using the wrong filter for your BMW model can cause fitment problems.
   • Solution: Verify the part number and vehicle compatibility before purchasing.

Regular maintenance and using genuine parts can help prevent these issues. If you encounter persistent problems, consulting a professional mechanic is advisable.

The BMW Oil Filter (part number 11428507697)

The BMW Oil Filter is a crucial component designed to maintain engine health by filtering out contaminants from the oil. This genuine BMW part ensures optimal performance and longevity for specific models, including the 2014-2018 BMW 328d, 2014-2016 BMW 535d, and 2014-2018 BMW X5.

Regular maintenance of this filter is essential to prevent issues such as oil leaks, clogging, cracks in the housing, improper installation, and compatibility problems.

Maintenance Tips:

• Change the oil and oil filter at intervals recommended by BMW (typically every 10,000 to 15,000 kilometers).
• Use high-quality, BMW-approved engine oil.
• Inspect for leaks regularly.
• Properly install the new filter.

Using this high-quality oil filter helps keep your BMW running smoothly and efficiently.