11428596283 – BMW Oil Filter Replacement Guide

The BMW Oil Filter (Part #11428596283) is a crucial component designed to ensure optimal engine performance and longevity. By effectively filtering out contaminants, it maintains clean oil circulation, which is essential for reducing engine wear and enhancing overall efficiency.

Specifications

BMW Oil Filter (Part Number: 11428596283)

• Dimensions: 16.1 x 13.0 x 8.6 inches
• Weight: 4.20 pounds
• Materials: Plastic

Compatibility

• BMW 230i (2017-2020) – 2.0L L4
• BMW 230i xDrive (2017-2020) – 2.0L L4
• BMW 320i (2018) – 2.0L L4
• BMW 320i xDrive (2018) – 2.0L L4
• BMW 330e (2016-2018) – 2.0L L4
• BMW 330i (2017-2018) – 2.0L L4
• BMW 330i GT xDrive (2017-2019) – 2.0L L4
• BMW 330i xDrive (2017-2019) – 2.0L L4
• BMW 430i (2017-2020) – 2.0L L4
• BMW 430i Gran Coupe (2017-2020) – 2.0L L4
• BMW 430i xDrive (2017-2020) – 2.0L L4
• BMW 430i xDrive Gran Coupe (2017-2020) – 2.0L L4
• BMW 530e (2017-2022) – 2.0L L4
• BMW 530e xDrive (2017-2022) – 2.0L L4
• BMW 530i (2017-2019) – 2.0L L4
• BMW 530i xDrive (2017-2019) – 2.0L L4
• BMW 740e xDrive iPerformance (2019) – 2.0L L4
• BMW X3 sDrive30i (2018-2019) – 2.0L L4
• BMW X3 xDrive30i (2018-2019) – 2.0L L4
• BMW X4 xDrive30i (2019) – 2.0L L4.

Installation Process

Sure, here’s a step-by-step guide to installing the BMW oil filter (part number 11428596283):

1. Preparation:

   • Ensure the engine is cool.
   • Gather necessary tools: socket wrench, oil filter wrench, drain pan, and new oil filter.
   • Wear safety gloves and goggles.

2. Drain the Oil:

   • Place the drain pan under the oil drain plug.
   • Remove the drain plug with a socket wrench and let the oil drain completely.
   • Replace the drain plug and tighten it securely.

3. Remove the Old Oil Filter:

   • Locate the oil filter housing.
   • Use the oil filter wrench to loosen and remove the old oil filter.
   • Be cautious of any remaining oil that may spill.

4. Install the New Oil Filter:

   • Apply a thin layer of new oil to the rubber gasket on the new oil filter.
   • Screw the new oil filter into the housing by hand until it is snug.
   • Use the oil filter wrench to tighten it an additional 3/4 turn. Do not overtighten.

5. Refill the Engine Oil:

   • Remove the oil filler cap on top of the engine.
   • Pour in the recommended amount and type of new engine oil.
   • Replace the oil filler cap.

6. Check for Leaks:

   • Start the engine and let it run for a few minutes.
   • Check around the oil filter and drain plug for any leaks.
   • Turn off the engine and recheck the oil level, adding more if necessary.

7. Dispose of Old Oil and Filter:

   • Properly dispose of the used oil and filter at a recycling center.

Always refer to your vehicle’s service manual for specific instructions and torque specifications. If you’re unsure about any step, it’s best to consult a professional mechanic.

Maintenance Tips

Here are some maintenance tips for the BMW oil filter (part number 11428596283):

1. Regular Oil Changes: Change the oil and oil filter every 5,000 to 7,500 miles to ensure optimal engine performance.
2. Use Quality Oil: Always use high-quality, BMW-approved engine oil to maintain the filter’s efficiency.
3. Inspect for Leaks: Regularly check for any oil leaks around the filter housing and replace seals if necessary.
4. Clean Surrounding Area: Keep the area around the oil filter clean to prevent contaminants from entering the engine.
5. Proper Installation: Ensure the filter is installed correctly and securely to avoid any potential issues.
6. Monitor Oil Levels: Regularly check and maintain proper oil levels to ensure the filter functions effectively.

Following these tips will help maintain the performance and longevity of your BMW’s oil filter.

The BMW Oil Filter (Part #11428596283)

is crucial for maintaining optimal engine performance and longevity by filtering out contaminants, ensuring clean oil circulation, and reducing engine wear.

Regular use of this filter, along with regular oil changes every 5,000 to 7,500 miles, high-quality oil, and proper installation, helps maintain the vehicle’s overall efficiency and extends its lifespan.