The BMW Part Gasket 11428637820 is a crucial component in BMW vehicles, specifically designed to ensure the proper functioning of the engine oil cooler system. This gasket acts as a seal between the engine oil cooler and the engine block, preventing any leaks that could potentially damage the engine. It is commonly referred to as the Oil Filter Housing Gasket and is used in various BMW models from 2006 to 2021.
Its primary function is to maintain a secure and leak-free connection, which is essential for the efficient cooling of the engine oil.
By doing so, it helps in maintaining the optimal performance and longevity of the engine. The gasket is also included with the oil filter housing assembly, making it an integral part of the engine’s cooling system.
In summary, the BMW Part Gasket 11428637820 plays a vital role in ensuring the engine’s cooling system operates effectively, thereby contributing to the overall performance and durability of the vehicle.
Part Number: 11428637820
Alternate Part Numbers: 11-42-8-637-820, 11 42 8 637 820
Description: Gasket between oil filter housing and oil cooler
Material: Rubber
Weight: 0.20 lbs (0.09 kg)
Dimensions: 18x13x0 cm (Package size)
Quantity per Car: 1 piece
Compatible Models:
2006-2021 BMW 1 Series (E82/E88)
2007-2018 BMW 3 Series (E46/E90/E91/E92/E93)
2007-2018 BMW X3
2007-2018 BMW X5
2012-2016 BMW 2 Series (F22/F23)
2013-2018 BMW 4 Series (F32/F33/F36)
2013-2018 BMW 5 Series (F10/F11/F18)
2013-2018 BMW 6 Series (F12/F13)
2013-2018 BMW 7 Series (F01/F02/F03)
2013-2018 BMW X1
2013-2018 BMW X4
2013-2018 BMW X6
2014-2018 BMW i3
2014-2018 BMW i8
2015-2018 BMW M3
2015-2018 BMW M4
2016-2021 BMW M2
2016-2021 BMW M5
2016-2021 BMW M6
Gather Necessary Tools: You will need a socket wrench set, torque wrench, screwdrivers, and a new gasket (BMW Part Gasket 11428637820).
Prepare the Vehicle: Ensure the engine is cool and the vehicle is on a flat surface. Disconnect the battery to prevent any electrical issues.
Remove the Old Gasket: Locate the oil filter housing and remove the screws securing it. Carefully lift the housing and remove the old gasket.
Clean the Surface: Thoroughly clean the area where the old gasket was seated to remove any debris or residue.
Install the New Gasket: Place the new gasket onto the oil filter housing, ensuring it is properly aligned.
Reattach the Housing: Carefully place the oil filter housing back onto the engine and secure it with the screws.
Use a torque wrench to tighten the screws to the manufacturer’s specifications.
Reconnect the Battery: Reconnect the battery and start the engine to check for any leaks.
Common Pitfalls to Avoid:
Forgetting to Disconnect the Battery: This can lead to electrical issues or accidental engine start.
Over-tightening Screws: This can damage the housing or the new gasket.
Not Cleaning the Surface: Residue or debris can cause leaks or improper sealing.
Incorrect Alignment: Ensure the gasket is properly aligned to avoid leaks.
By following these steps and avoiding common pitfalls, you can successfully install the BMW Part Gasket 11428637820.
To maintain the BMW Part Gasket 11428637820, follow these practical steps:
Regular Inspection: Check the gasket for any signs of wear and tear, such as cracks, brittleness, or oil leaks. Inspect the area around the oil filter housing and oil cooler for any signs of oil seepage.
Clean Surrounding Area: Keep the area around the gasket clean from dirt and debris. Use a soft brush or cloth to remove any buildup that could cause abrasion or damage to the gasket.
Proper Installation: Ensure the gasket is installed correctly and securely.
Avoid over-tightening bolts, as this can cause the gasket to deform or crack.
Use High-Quality Replacement Parts: When replacing the gasket, use genuine BMW parts or high-quality aftermarket parts to ensure longevity and proper fitment.
Regular Oil Changes: Maintain regular oil changes to prevent contaminants from damaging the gasket. Use the recommended oil type for your BMW model.
Monitor Engine Temperature: Keep an eye on your engine’s temperature. Overheating can cause the gasket to deteriorate faster.
Ensure your cooling system is functioning properly.
Avoid Harsh Chemicals: Avoid using harsh chemicals or solvents near the gasket, as they can cause it to degrade.
By following these steps, you can extend the lifespan of the BMW Part Gasket 11428637820 and ensure your engine runs smoothly.
The BMW Part Gasket 11428637820 is a crucial component in BMW vehicles, ensuring the engine oil cooler system functions properly. It acts as a seal between the engine oil cooler and the engine block, preventing leaks that could damage the engine.
The gasket is included with the oil filter housing assembly and plays a vital role in maintaining the engine’s cooling system.
To install the gasket, gather necessary tools, prepare the vehicle, remove the old gasket, clean the surface, install the new gasket, reattach the housing, and reconnect the battery. Avoid common pitfalls such as forgetting to disconnect the battery, over-tightening screws, not cleaning the surface, and incorrect alignment.
To maintain the gasket, perform regular inspections, keep the surrounding area clean, ensure proper installation, use high-quality replacement parts, maintain regular oil changes, monitor engine temperature, and avoid harsh chemicals. By following these steps, you can extend the lifespan of the BMW Part Gasket 11428637820 and ensure your engine runs smoothly.
