The BMW Part Plug-in Nut 31106779393 is a genuine component manufactured by BMW, specifically designed for various BMW models from 2002 to 2016. This part is primarily used in the front axle support, wishbone, and tension strut assemblies of BMW vehicles.
What sets this plug-in nut apart is its high-quality construction and durability, ensuring a perfect fit and long-lasting performance. Made from robust materials, it undergoes rigorous testing to meet BMW’s stringent standards.
This makes it an essential part for maintaining the structural integrity and safety of BMW vehicles.
Does this cover what you were looking for?
Material: Steel
Dimensions: M10-10-ZNS3
Compatibility: Fits various BMW models including 2002-2016 BMW 3 Series, 5 Series, 7 Series, and X Series. Specifically compatible with chassis codes E60, E63, E65, E90, E92, E93, F02, F12.
Torque wrench
Socket set (including M10 socket)
Screwdrivers
Safety gloves
Safety goggles
Ensure the vehicle is parked on a flat surface and the parking brake is engaged.
Disconnect the battery to prevent any electrical accidents.
Wear safety gloves and goggles to protect your hands and eyes.
Locate the old plug-in nut: Refer to your vehicle’s service manual to find the exact location of the plug-in nut (part number 31106779393).
Remove the old plug-in nut: Use the appropriate socket (M10) and a torque wrench to loosen and remove the old plug-in nut.
Clean the area: Thoroughly clean the area where the old plug-in nut was located to ensure there is no debris or rust.
Install the new plug-in nut: Place the new plug-in nut (part number 31106779393) in the same position as the old one.
Tighten the new plug-in nut: Use the torque wrench and socket to tighten the new plug-in nut to the manufacturer’s specified torque.
Reconnect the battery: Reconnect the vehicle’s battery and ensure everything is properly secured.
Test the installation: Start the vehicle and test the area where the plug-in nut was installed to ensure it is secure and functioning correctly.
Double-check all connections and ensure everything is tightened properly.
Inspect the area for any signs of damage or misalignment.
By following these steps, you should be able to successfully install the BMW Part Plug-in nut 31106779393. If you encounter any issues, refer to your vehicle’s service manual or consult a professional mechanic.
Regular Inspection: Check the plug-in nut for any signs of wear, corrosion, or damage during routine maintenance.
Proper Torque: Ensure the plug-in nut is torqued to the manufacturer’s specifications to avoid over-tightening or under-tightening.
Clean and Lubricate: Clean the nut and surrounding area regularly, and apply a light lubricant to prevent seizing and ensure smooth operation.
Replace if Worn: Replace the plug-in nut immediately if any signs of wear or damage are detected to prevent further issues.
Use Genuine Parts: Always use genuine BMW parts to ensure compatibility and optimal performance.
Follow BMW Service Schedule: Adhere to BMW’s recommended service schedule for inspections and replacements.
Common issues with the BMW Part Plug-in nut 31106779393 include:
Loose or Missing Nuts: Over time, these nuts can become loose or even go missing, leading to instability in the vehicle’s components.
Solution: Regularly inspect and tighten these nuts. If missing, replace them immediately with genuine BMW parts to ensure proper fit and function.
Corrosion: Exposure to moisture and road salts can cause the nuts to corrode, which can lead to difficulty in removal or improper fit.
Solution: Clean the nuts regularly with a rust remover and apply a corrosion-resistant lubricant. Replace any severely corroded nuts.
Wear and Tear: Continuous use can cause the nuts to wear out, affecting their grip and stability.
Solution: Inspect the nuts for signs of wear and replace them if necessary.
Using high-quality replacement parts can help extend their lifespan.
Incorrect Installation: Improper installation can lead to misalignment or damage to the part and surrounding components.
Solution: Ensure that the nuts are installed correctly according to the manufacturer’s specifications. If unsure, consult a professional mechanic.
Compatibility Issues: Using non-genuine or incorrect parts can cause compatibility issues, leading to malfunction or damage.
Solution: Always use genuine BMW parts and verify compatibility with your specific vehicle model before purchasing and installing.
By addressing these issues promptly and using the right solutions, you can maintain the performance and safety of your BMW vehicle.
The BMW Part Plug-in Nut 31106779393 is a genuine component designed for various BMW models from 2002 to 2016, primarily used in the front axle support, wishbone, and tension strut assemblies. Its high-quality construction and durability ensure a perfect fit and long-lasting performance. Made from robust materials, it undergoes rigorous testing to meet BMW’s stringent standards.
This plug-in nut is essential for maintaining the structural integrity and safety of BMW vehicles. It is made of steel with dimensions M10-10-ZNS3 and compatible with various BMW models including 2002-2016 BMW 3 Series, 5 Series, 7 Series, and X Series.
To install this part, a torque wrench, socket set (including M10 socket), screwdrivers, safety gloves, and safety goggles are required. Safety precautions include ensuring the vehicle is parked on a flat surface, disconnecting the battery, and wearing protective gear.
Regular inspection, proper torque, cleaning and lubrication, replacing if worn, using genuine parts, and following BMW’s service schedule are crucial for maintaining this part’s performance and longevity. Common issues with this part include loose or missing nuts, corrosion, wear and tear, incorrect installation, and compatibility problems.
