The BMW Part Brake Disc, Ventilated, with Holes, Rear 34206797598 is a crucial component of the vehicle’s braking system. This ventilated brake disc is designed to enhance cooling efficiency, reducing the risk of brake fade during intensive use. The holes in the disc further aid in dissipating heat, ensuring consistent braking performance and longevity.
Installed at the rear, this part works in tandem with the brake pads to provide reliable stopping power, contributing to the overall safety and performance of the vehicle.
Dimensions: 345mm diameter, 24mm thickness
Material Composition: High-carbon cast iron
Unique Features: Ventilated design with holes for improved cooling and reduced unsprung mass
Gather Necessary Tools: You will need a jack and jack stands, a lug wrench, a set of socket wrenches (including a 7mm or 8mm Allen wrench), a torque wrench, a C-clamp or brake caliper piston back tool, and brake cleaner.
Safety Precautions: Ensure the vehicle is on a flat surface and the parking brake is engaged. Use wheel chocks to prevent the vehicle from moving.
Lift the Vehicle: Use the jack to lift the vehicle and place it securely on jack stands.
Remove the Wheel: Use the lug wrench to remove the lug nuts and take off the wheel.
Remove the Brake Caliper: Use the socket wrenches to remove the caliper bolts and carefully slide the caliper off the brake disc.
Remove the Brake Disc: Remove the screws or bolts holding the brake disc in place and take off the old brake disc.
Clean the Hub: Clean the hub surface to remove any rust or debris that could affect the new brake disc.
Install the New Brake Disc: Place the new brake disc onto the hub and secure it with the screws or bolts. Tighten them to the manufacturer’s specified torque.
Reinstall the Brake Caliper: Slide the caliper back over the new brake disc and secure it with the caliper bolts.
Tighten them to the specified torque.
Reinstall the Wheel: Put the wheel back on and hand-tighten the lug nuts.
Lower the Vehicle: Use the jack to lower the vehicle back to the ground.
Tighten the Lug Nuts: Use the torque wrench to fully tighten the lug nuts to the manufacturer’s specified torque.
Test the Brakes: Before driving, pump the brake pedal a few times to ensure the brakes are functioning properly.
Road Test: Take a short test drive to ensure everything is working correctly and there are no unusual noises or vibrations.
Final Check: After the test drive, recheck the lug nuts and brake disc to ensure everything is secure.
Dispose of Old Parts: Properly dispose of the old brake disc and any other parts you replaced.
Clean Up: Clean up your tools and work area.
Safety Reminder: Always follow the manufacturer’s instructions and safety guidelines when performing any maintenance on your vehicle.
Regular Inspections: Check the brake discs for any signs of wear, damage, or uneven wear patterns. Inspect the brake pads and sensors for wear and replace them as needed.
Cleaning: Clean the brake discs regularly to remove dirt, debris, and brake dust. Use a brake cleaner spray and a soft brush to avoid scratching the surface.
Brake Pad Replacement: Replace the brake pads when they reach the minimum thickness specified by the manufacturer.
Always replace them in pairs (both front or both rear) to ensure even braking.
Brake Fluid: Ensure the brake fluid is at the correct level and replace it according to the manufacturer’s recommendations. Use only the recommended type of brake fluid for your BMW.
Torque Specifications: Follow the manufacturer’s torque specifications when installing or replacing brake components to ensure proper fit and function.
Avoid Overheating: Avoid excessive braking, especially during long descents, to prevent overheating the brake discs and pads. Use engine braking or downshifting to reduce the load on the brakes.
Professional Servicing: Have your brakes inspected and serviced by a qualified BMW technician at regular intervals to ensure optimal performance and safety.
By following these maintenance tips, you can ensure the longevity and performance of your BMW brake discs.
The BMW Part Brake disc, ventilated, w/holes, rear 34206797598 offers several performance benefits that enhance braking efficiency and vehicle safety. The ventilated design allows for better heat dissipation, reducing the risk of brake fade during prolonged use. The holes in the disc further aid in cooling by increasing airflow, which helps maintain optimal braking performance even under demanding conditions.
Additionally, the robust construction of this brake disc ensures consistent and reliable braking, contributing to overall vehicle safety. The combination of these features makes it an excellent choice for drivers seeking improved braking performance and enhanced safety.
The BMW Part Brake Disc, Ventilated, with Holes, Rear 34206797598 is a crucial component of the vehicle’s braking system, designed to enhance cooling efficiency and reduce brake fade during intensive use. Its ventilated design allows for better heat dissipation, while the holes in the disc aid in dissipating heat and ensuring consistent braking performance.
The part works in tandem with the brake pads to provide reliable stopping power, contributing to overall safety and performance of the vehicle. Regular maintenance is essential to ensure optimal performance and longevity of the brake disc. This includes regular inspections, cleaning, brake pad replacement, brake fluid checks, and following torque specifications.
Avoiding overheating by not using excessive braking, especially during long descents, is also crucial. The BMW Part Brake Disc, Ventilated, with Holes, Rear 34206797598 offers several performance benefits that enhance braking efficiency and vehicle safety, making it an excellent choice for drivers seeking improved braking performance and enhanced safety.
