The BMW Part Adjusting Screw 34416851438 is a crucial component in BMW vehicles, specifically used in the parking brake system. This part ensures the proper adjustment and functionality of the parking brake, contributing to the vehicle’s overall safety and performance. It is designed to fit a wide range of BMW models from 1969 to 2020, making it a versatile and essential part for BMW owners.
The adjusting screw allows for fine-tuning of the parking brake mechanism, ensuring that the brake pads engage correctly and provide the necessary stopping power. Its significance lies in maintaining the reliability and safety of the parking brake system, which is vital for preventing unintended vehicle movement when parked.
The BMW Part Adjusting Screw 34416851438 has the following specific features and technical specifications:
Dimensions: The adjusting screw has a length of approximately 50 mm and a diameter of 8 mm.
Material: It is made from high-quality steel, ensuring durability and resistance to wear and tear.
Compatibility: This part is compatible with a wide range of BMW models, including:
1969-2020 BMW 325i
1996-2015 BMW 328i
1979-1981 BMW 528i
1988-1991 BMW M3
2008-2013 BMW 128i Convertible (N51 Engine)
2014-2016 BMW 228i Convertible (N20 Engine)
2015-2016 BMW 228i xDrive Convertible (N20 Engine)
2017-2020 BMW 230i Convertible (F23), Coupe (F22)
1969-1970 BMW 2500
1969-1970 BMW 2800
1971-1974 BMW 3.0CS
1973-1974 BMW 3.0S
1975-1976 BMW 3.0Si
This part is a direct replacement for the following part numbers: 34-41-1-166-245, 34-41-1-160-513.
Gather Necessary Tools: You will need a set of wrenches, a screwdriver, and possibly a pair of pliers. Ensure you have a clean workspace and good lighting.
Safety Precautions: Disconnect the battery to avoid any electrical issues. Wear safety gloves and eye protection to prevent injuries.
Locate the Adjusting Screw: The adjusting screw is typically found near the parking brake cable, under the vehicle.
Remove the Old Screw: Use the appropriate wrench to loosen and remove the old adjusting screw.
Keep track of any washers or small parts that come off.
Install the New Screw: Thread the new adjusting screw into place, using the wrench to tighten it. Ensure it is secure but not overtightened.
Adjust the Parking Brake: Use the screwdriver to adjust the parking brake cable tension. Refer to your vehicle’s manual for the correct tension settings.
Reconnect the Battery: Once the new screw is installed and adjusted, reconnect the battery.
Test the Parking Brake: Before driving, test the parking brake to ensure it is functioning correctly.
Common Challenges:
Accessing the Screw: The location of the adjusting screw can be difficult to reach, requiring you to maneuver around other components.
Correct Tension: Achieving the correct tension can be tricky and may require several adjustments.
Tight Spaces: Working in tight spaces can make it challenging to use tools effectively.
By following these steps, you should be able to successfully install the BMW Part Adjusting Screw 34416851438.
To maintain the BMW Part Adjusting screw 34416851438 for optimal performance and longevity, follow these best practices:
Remove the screw: Carefully detach the adjusting screw from the vehicle.
Clean with a degreaser: Use a suitable automotive degreaser to remove any dirt, grease, or grime.
Rinse with water: After degreasing, rinse the screw thoroughly with clean water.
Dry completely: Ensure the screw is completely dry before reinstallation to prevent rust and corrosion.
Inspect for damage: Regularly check the screw for any signs of wear, corrosion, or damage.
Check for smooth operation: Ensure the screw moves smoothly without any resistance or sticking.
Lubricate: Apply a small amount of appropriate lubricant to keep the screw moving smoothly.
Rust or corrosion: Look for any rust or corrosion on the screw, which can affect its performance.
Wear on threads: Check the threads for any signs of wear or damage, which can lead to improper adjustment.
Difficulty in adjustment: If the screw becomes difficult to adjust, it may be a sign of internal wear or damage.
By following these practices, you can help ensure the longevity and optimal performance of the BMW Part Adjusting screw 34416851438.
The BMW Part Adjusting Screw 34416851438 is a critical component in the parking brake system of various BMW models from 1969 to 2020. Proper handling and maintenance of this part are essential for ensuring the safety and performance of the vehicle.
The screw allows for fine-tuning of the parking brake mechanism, and its significance lies in maintaining the reliability and safety of the parking brake system.
To maintain the adjusting screw for optimal performance and longevity, it is recommended to clean it regularly with a degreaser, rinse it thoroughly with water, and dry it completely before reinstallation. Regular checks should also be performed to inspect for damage, check for smooth operation, and lubricate the screw as needed.
Signs of wear and tear include rust or corrosion, wear on threads, and difficulty in adjustment. If any of these issues are encountered, it is recommended to consult a professional mechanic for assistance.
By following proper handling and maintenance procedures, users can help ensure the longevity and optimal performance of the BMW Part Adjusting screw 34416851438.
