The BMW Part Module, clutch switch 35426876898, is a crucial component in BMW vehicles. This switch is located near the clutch pressure hose assembly and plays a vital role in the vehicle’s operation. It is responsible for monitoring the position of the clutch pedal and sending signals to the car’s electronic control unit (ECU).
This information is essential for various functions, such as enabling the vehicle to start, shifting gears smoothly, and ensuring the proper operation of the clutch system. Without a functioning clutch switch, the vehicle may experience issues with gear shifting, stalling, or even failing to start. Therefore, maintaining and replacing this part when necessary is essential for the overall performance and reliability of BMW vehicles.
The BMW Part Module, clutch switch 35426876898, also known as the Clutch Starter Safety Switch or Range Sensor, is a direct replacement part for various BMW models from 2002 to 2023. It is designed to ensure the proper functioning of the clutch system and prevent accidental engine starts.
This part is manufactured by BMW and comes with a minimum 12-month warranty. It is compatible with models such as the 323, 328, 325, 330i, ci, xi, 430i, 440i, 440ix, 640i xDrive, 650i xDrive, 128i, 135i, M3, M4, and 645Ci.
The clutch switch module is identified by the part number 35426876898 and replaces several other part numbers including 61-31-6-905-900, 61-31-6-905-898, 61-31-9-122-702, 61-31-0-141-210, and 61-31-9-231-129.
It is crucial for the safety and performance of the vehicle, ensuring that the engine can only be started when the clutch pedal is engaged.
The switch is made to high-quality standards, ensuring durability and reliability.
Flathead screwdriver
Phillips head screwdriver
10mm wrench
7mm wrench
Multimeter (optional, for testing)
Jack and jack stands (if needed for access)
Safety gloves and goggles
Disconnect the Battery: Ensure safety by disconnecting the negative terminal of the car battery to prevent any electrical accidents.
Locate the Clutch Switch: The clutch switch is typically located near the clutch pedal assembly, under the dashboard.
Remove the Clutch Pedal Cover: Use a flathead screwdriver to carefully pry off the clutch pedal cover.
Disconnect the Clutch Switch Wires: Use a Phillips head screwdriver to remove the screws securing the clutch switch to the pedal assembly. Carefully disconnect the wiring harness from the switch.
Remove the Old Clutch Switch: Use a 10mm wrench to loosen and remove the nuts securing the clutch switch to the pedal assembly. Remove the old switch.
Install the New Clutch Switch: Position the new clutch switch in place and secure it with the nuts using a 10mm wrench.
Reconnect the wiring harness to the new switch.
Reattach the Clutch Pedal Cover: Replace the clutch pedal cover and secure it with screws using a Phillips head screwdriver.
Reconnect the Battery: Reconnect the negative terminal of the car battery.
Wear Safety Gloves and Goggles: Protect your hands and eyes from any sharp edges or debris.
Work in a Well-Lit Area: Ensure you have good visibility to avoid mistakes.
Double-Check Connections: Ensure all connections are secure and properly seated to avoid electrical issues.
Use Jack Stands if Needed: If you need to lift the car for better access, always use jack stands to support the vehicle securely.
Failure to Start: The car may not start if the clutch switch is faulty.
Cruise Control Malfunction: The cruise control may not disengage when the clutch is pressed.
Erratic Behavior: The switch may cause erratic behavior in the vehicle’s electronics.
Regular Inspection: Check the clutch switch regularly for any signs of wear or damage.
Clean Contacts: Ensure the contacts are clean and free from corrosion.
Proper Installation: Ensure the switch is installed correctly and securely.
Check for Error Codes: Use an OBD-II scanner to check for any error codes related to the clutch switch.
Visual Inspection: Inspect the switch for any visible damage or wear.
Test Functionality: Test the switch by pressing the clutch pedal and checking if the car starts or if the cruise control disengages.
Replace Faulty Switch: If the switch is faulty, replace it with a genuine BMW part.
Clean Contacts: Clean the contacts if they are dirty or corroded.
Check Wiring: Ensure the wiring connected to the switch is intact and not damaged.
The BMW Part Module, clutch switch 35426876898, is a crucial component for BMW vehicles, responsible for monitoring the clutch pedal position and sending signals to the ECU. It ensures proper gear shifting, prevents accidental engine starts, and maintains overall vehicle performance.
This part is designed to replace several other numbers, including 61-31-6-905-900, 61-31-6-905-898, and 61-31-9-122-702, and comes with a minimum 12-month warranty.
It is compatible with various BMW models from 2002 to 2023. The switch is made to high-quality standards, ensuring durability and reliability.
Replacing this part when necessary is essential for maintaining the vehicle’s performance and preventing issues such as failure to start, cruise control malfunction, or erratic behavior. Regular inspection, proper installation, and cleaning of contacts are also crucial for optimal performance.
