The BMW Wheel Electric Module RDCi with Screw Valve (part number 36106887147) is a crucial component in BMW’s tire pressure monitoring system (TPMS). This module ensures accurate tire pressure readings, enhancing vehicle safety and performance. It is compatible with various BMW models from 2016 to 2020, including the 530i, M5, and X3.
Product Description
The BMW Wheel Electric Module RDCi with Screw Valve (Part Number: 36106887147) is a genuine BMW part designed for tire pressure monitoring. Here are its detailed features, specifications, and compatibility:
Features:
- Type: Tire Pressure Monitoring System (TPMS) Sensor
- Function: Monitors tire pressure and transmits data to the vehicle’s onboard computer
- Frequency: 433 MHz
- Includes: Screw valve for secure attachment
Specifications:
- Brand: Genuine BMW
- Manufacturer Part Number: 36106887147
- Weight: 4.20 pounds
- Condition: New
- Fitment Type: Direct Replacement
- Replaces Part Numbers: 36-10-6-876-957, 36-10-6-872-803
- Warranty: Covered by BMW’s factory warranty
Compatibility:
This part is compatible with a wide range of BMW models from 2016 to 2020, including but not limited to:
- BMW 530e Sedan (G30) (2018-2020)
- BMW 530e xDrive Sedan (G30) (2018-2020)
- BMW 530i Sedan (G30) (2017-2020)
- BMW 530i xDrive Sedan (G30) (2017-2020)
- BMW 540d xDrive Sedan (G30) (2018)
- BMW 540i Sedan (G30) (2017-2020)
- BMW 540i xDrive Sedan (G30) (2017-2020)
- BMW 640i xDrive Gran Turismo (G32) (2018-2019)
- BMW 740e xDrive Sedan (G12) (2017-2019)
- BMW 740i Sedan (G12) (2016-2020)
- BMW X3 (2020)
This module ensures reliable tire pressure monitoring, enhancing safety and performance.
Functionality
The BMW part Wheel Electric Module RDCi with Screw Valve (36106887147) is a crucial component of the Tire Pressure Monitoring System (TPMS). Here’s how it contributes to performance and safety:
- Tire Pressure Monitoring: It continuously monitors the air pressure in each tire, ensuring they are within the optimal range. Proper tire pressure is essential for maintaining vehicle stability, handling, and fuel efficiency.
- Safety Alerts: If the tire pressure drops below a certain threshold, the module sends an alert to the driver. This helps prevent accidents caused by under-inflated tires, such as blowouts or loss of control.
- Fuel Efficiency: By maintaining the correct tire pressure, it helps improve fuel efficiency, reducing overall fuel consumption and emissions.
- Tire Longevity: Properly inflated tires wear more evenly, extending their lifespan and saving on replacement costs.
Overall, this module enhances both the performance and safety of the vehicle by ensuring optimal tire conditions at all times.
Installation Process
Here’s a concise guide for installing the BMW Wheel Electr. Module RDCi with Screw Valve (Part #36106887147):
Necessary Tools:
- Torque wrench
- Valve core tool
- Tire pressure gauge
- Jack and jack stands
- Lug wrench
- Screwdriver set
Installation Steps:
-
Preparation:
- Ensure the vehicle is on a flat surface.
- Engage the parking brake and place wheel chocks behind the wheels.
-
Wheel Removal:
- Use the lug wrench to loosen the lug nuts on the wheel.
- Lift the vehicle using the jack and secure it with jack stands.
- Remove the lug nuts and take off the wheel.
-
Module Installation:
- Locate the existing valve stem and remove it using the valve core tool.
- Install the new RDCi module with the screw valve into the valve stem hole.
- Tighten the screw valve to the manufacturer’s specified torque using the torque wrench.
-
Reinstall the Wheel:
- Place the wheel back onto the hub.
- Hand-tighten the lug nuts.
- Lower the vehicle from the jack stands.
- Use the torque wrench to tighten the lug nuts to the manufacturer’s specifications.
-
Final Checks:
- Check the tire pressure using the tire pressure gauge and adjust if necessary.
- Ensure the RDCi module is functioning correctly by checking the vehicle’s onboard diagnostics.
This should ensure proper fitment and functionality of the new module.
Maintenance and Care
Here are some tips to maintain and care for your BMW Wheel Electric Module RDCi with Screw Valve (36106887147):
- Regular Inspections: Check the module and valve for any signs of damage or wear. Look for cracks, corrosion, or loose connections.
- Cleanliness: Keep the module and valve clean. Use a soft cloth and mild cleaner to remove dirt and debris.
- Proper Installation: Ensure the module is installed correctly. Follow BMW’s guidelines to avoid any issues.
- Avoid Harsh Conditions: Protect the module from extreme temperatures and harsh chemicals that could cause damage.
- Battery Check: If the module has a battery, check its charge regularly and replace it as needed.
- Professional Servicing: Have the module inspected and serviced by a professional during regular vehicle maintenance.
Following these tips will help ensure your module remains in optimal condition.
The BMW Wheel Electric Module RDCi with Screw Valve
The BMW Wheel Electric Module RDCi with Screw Valve (part number 36106887147) is a crucial component in the tire pressure monitoring system of various BMW models from 2016 to 2020, including the 530i, M5, and X3.
This genuine BMW part ensures accurate tire pressure readings, enhancing vehicle safety and performance. It continuously monitors air pressure, sends alerts for under-inflated tires, improves fuel efficiency, and extends tire longevity.
The module is compatible with a wide range of BMW models and comes with a screw valve for secure attachment.
Installation Requirements
To install the module, necessary tools include:
- A torque wrench
- A valve core tool
- A tire pressure gauge
- A jack and jack stands
- A lug wrench
- A screwdriver set
Maintenance Tips
Regular inspections, cleanliness, proper installation, avoidance of harsh conditions, battery checks, and professional servicing are essential to maintain the module’s optimal condition.
