The BMW Part Bumper Guard 51112265636 is a front bumper moulding designed for BMW vehicles, specifically for models like the E36 M3. This part serves as a protective strip that helps absorb impact and minimize damage to the vehicle’s front bumper in the event of a collision. It is commonly used on BMW vehicles produced between 1991 and 1999.
The bumper guard also features raised BMW letters, adding a distinctive aesthetic touch to the vehicle’s front end.
Does this cover what you were looking for?
Design: The BMW Part Bumper Guard 51112265636 features an OE dimpled surface front bumper strip with raised BMW letters. It is designed specifically for vehicles with M3 front bumpers produced from April 1995 onwards.
Materials: This bumper guard is manufactured using high-quality materials that ensure durability and dependability. It undergoes rigorous testing to meet BMW’s standards.
Unique Aspects: The raised BMW letters on the bumper guard add a distinctive aesthetic touch, making it unique to BMW vehicles.
It is also designed to fit various BMW models from 1991 to 1999, including the BMW 318ti and M3.
Gather Tools: You will need a trim removal tool, a flathead screwdriver, and a new bumper guard (part number 51112265636).
Prepare the Vehicle: Park the vehicle on a flat surface and turn off the engine. Engage the parking brake.
Remove Old Bumper Guard: Use the trim removal tool to carefully pry off the old bumper guard. Start at one corner and work your way around, being careful not to damage the paint.
Clean the Surface: Once the old guard is removed, clean the area with a mild detergent and water.
Dry thoroughly.
Position the New Bumper Guard: Align the new bumper guard with the mounting points on the bumper. Ensure it is straight and properly aligned.
Install the New Bumper Guard: Press the new bumper guard into place starting from one end. Use the trim removal tool to press it firmly into the mounting points.
Secure the Bumper Guard: If the bumper guard has clips, use the flathead screwdriver to snap them into place.
Ensure all clips are securely fastened.
Final Check: Inspect the installation to ensure the bumper guard is securely attached and properly aligned. Make any necessary adjustments.
Clean Up: Remove any tools and clean up the work area.
Test: Start the vehicle and gently test the bumper guard to ensure it is securely installed and does not move.
Tips for a Successful Installation:
Work Slowly: Take your time to avoid damaging the bumper or paint.
Use Gentle Pressure: Apply gentle pressure with the trim removal tool to avoid cracking the bumper guard.
Double-Check Alignment: Ensure the bumper guard is straight and properly aligned before securing it.
I hope this helps!
To ensure the longevity and optimal performance of the BMW Part Bumper Guard 51112265636, follow these maintenance and care steps:
Regular Cleaning: Clean the bumper guard regularly using a mild detergent and water. Avoid using harsh chemicals or abrasive materials that can damage the surface.
Waxing: Apply a high-quality car wax to the bumper guard every few months to protect it from UV rays and environmental contaminants.
Inspection: Check the bumper guard periodically for any signs of damage, such as cracks or loose fittings. Address any issues promptly to prevent further damage.
Avoid Heavy Impact: Be cautious when parking or driving in tight spaces to avoid damaging the bumper guard.
Use parking sensors or cameras if available.
Professional Maintenance: If the bumper guard becomes heavily soiled or damaged, consider seeking professional cleaning or repair services to ensure it is properly maintained.
By following these steps, you can help maintain the appearance and functionality of your BMW bumper guard.
The BMW Part Bumper Guard 51112265636 provides substantial protection by absorbing impacts and reducing potential damage to the vehicle’s exterior, safeguarding against scrapes, dings, and minor collisions. Beyond its protective qualities, this bumper guard integrates seamlessly with the vehicle’s design, maintaining the BMW’s sleek and polished aesthetic. Its presence not only preserves the vehicle’s value but also adds a subtle yet significant enhancement to its overall appearance.
Ideal for city driving and parking in tight spaces, this guard blends functionality with style, embodying BMW’s commitment to both performance and elegance.
The BMW Part Bumper Guard 51112265636 is a crucial component for BMW vehicles, particularly those produced between 1991 and 1999. Its primary function is to serve as a protective strip that absorbs impact and minimizes damage to the vehicle’s front bumper in the event of a collision.
This guard features an OE dimpled surface with raised BMW letters, adding a distinctive aesthetic touch to the vehicle’s front end. Manufactured using high-quality materials, this bumper guard undergoes rigorous testing to meet BMW’s standards.
Its unique design allows it to fit various BMW models from 1991 to 1999, including the BMW 318ti and M3. Installation of the bumper guard is a relatively straightforward process that requires basic tools and attention to detail. It is essential to work slowly, use gentle pressure, and double-check alignment to avoid damaging the bumper or paint.
Regular maintenance and care are crucial to ensure the longevity and optimal performance of the BMW Part Bumper Guard 51112265636. This includes regular cleaning with a mild detergent and water, waxing every few months, inspecting for damage, avoiding heavy impact, and seeking professional maintenance when necessary.
The benefits of this bumper guard extend beyond its protective qualities, as it seamlessly integrates with the vehicle’s design while maintaining the BMW’s sleek and polished aesthetic. Its presence preserves the vehicle’s value and adds a subtle yet significant enhancement to its overall appearance, making it an ideal addition for city driving and parking in tight spaces.
