The BMW Part Outside Mirror Cover Cap, Primed, Right 51167292746 is a specific component designed to cover the exterior side mirror on the right side of BMW vehicles. This part is primed, meaning it has been prepped with a base coat of paint, ready for the final color application.
Over time, the cover cap can become damaged due to impacts, harsh weather conditions, or general wear and tear. When this happens, replacing it is crucial not only to restore the vehicle’s aesthetic appeal but also to ensure the proper functioning of the side mirror.
The cover cap protects the internal components of the mirror, helping to prevent moisture and debris from entering and causing damage.
Maintaining this part is important for both the visual integrity and the functional longevity of the side mirror, contributing to the overall appearance and safety of the vehicle.
Dimensions: 5.5 x 3.5 x 1.5 inches (14 x 9 x 4 cm)
Material: Primed plastic
Compatible BMW Models:
2012-2020 BMW 1 Series (F20, F21)
2012-2020 BMW 2 Series (F22, F23)
2012-2020 BMW 3 Series (F30, F31, F34, F35)
2012-2020 BMW 4 Series (F32, F33, F36)
2012-2020 BMW 5 Series (F10, F11, F18)
2012-2020 BMW 6 Series (F12, F13)
2012-2020 BMW 7 Series (F01, F02, F03)
2012-2020 BMW X1 (E84)
2012-2020 BMW X3 (E83)
2012-2020 BMW X4 (E84)
2012-2020 BMW X5 (E70, E71)
2012-2020 BMW X6 (E71)
2012-2020 BMW Z4 (E89)
Flathead screwdriver
Trim removal tool (optional)
Clean cloth
Automotive adhesive (if necessary)
Ensure the vehicle is parked on a flat surface and the parking brake is engaged.
Wear safety gloves to protect your hands.
Avoid using excessive force to prevent damage to the mirror or cover.
Prepare the Area: Park the vehicle on a flat surface and engage the parking brake. Open the door to access the outside mirror.
Remove the Old Cover: Use a flathead screwdriver to gently pry off the old cover. Start at one corner and work your way around.
If needed, use a trim removal tool to avoid damaging the mirror.
Clean the Surface: Wipe the area with a clean cloth to remove any dirt or debris. Ensure the surface is dry before proceeding.
Position the New Cover: Align the new cover with the mounting points on the mirror. Press it firmly into place.
Secure the Cover: If the cover does not snap into place easily, apply a small amount of automotive adhesive to the edges.
Press the cover firmly and hold for a few seconds to ensure a secure bond.
Check Alignment: Verify that the cover is properly aligned and securely attached. Adjust if necessary.
Final Inspection: Close the door and inspect the cover from different angles to ensure it is properly installed and there are no gaps or misalignments.
Your BMW’s right outside mirror cover should now be successfully replaced. If you encounter any issues, consult a professional technician for assistance.
Regularly clean it with mild soap and water to prevent dirt and grime buildup.
Apply a UV-protectant spray to shield it from sun damage.
Avoid harsh chemicals or abrasive cleaners that can strip the priming.
If you notice chips or scratches, touch them up with primer to prevent rust.
Ensure the attachment points are secure and tight, avoiding loose fittings.
During winter, remove ice and snow gently without using sharp tools that can scratch the surface.
Check periodically for any signs of wear and address them promptly to maintain the cover’s aesthetics and functionality.
Common issues with the BMW Part Outside Mirror Cover Cap, Primed, Right 51167292746 include:
Cracks or Breaks: The cover cap can crack or break due to impacts, such as from parking too close to obstacles or minor collisions.
Paint Chipping: The primed surface can chip, exposing the underlying material to the elements.
Loose Fit: Over time, the cover cap may become loose and not stay securely in place.
Discoloration: Exposure to sunlight and weather can cause the cover cap to fade or discolor.
To address these issues:
Cracks or Breaks: Replace the damaged cover cap with a new one. Ensure proper alignment and fitment during installation.
Paint Chipping: Touch up the chipped areas with automotive paint that matches the original color. Sand the area lightly before applying the paint.
Loose Fit: Reattach the cover cap securely.
If necessary, use adhesive or clips to ensure it stays in place.
Discoloration: Clean the cover cap regularly with appropriate car cleaning products. Consider applying a protective coating to prevent further fading.
The BMW Part Outside Mirror Cover Cap, Primed, Right 51167292746 is a crucial component designed to protect the exterior side mirror on the right side of BMW vehicles. It’s primed and ready for final color application. Replacing it ensures proper functioning and aesthetic appeal. The cover cap protects internal components from moisture and debris.
Dimensions: 5.5 x 3.5 x 1.5 inches (14 x 9 x 4 cm). Material: Primed plastic.
Compatible with various BMW models, including the 1 Series, 2 Series, 3 Series, 4 Series, 5 Series, 6 Series, 7 Series, X1, X3, X4, X5, and Z4.
Tools needed include a flathead screwdriver, trim removal tool (optional), clean cloth, and automotive adhesive.
Safety precautions involve parking on a flat surface, engaging the parking brake, wearing safety gloves, and avoiding excessive force.
Installation steps include preparing the area, removing the old cover, cleaning the surface, positioning the new cover, securing it with adhesive if necessary, checking alignment, and performing a final inspection.
Regular maintenance involves cleaning the cover cap with mild soap and water, applying UV-protectant spray, avoiding harsh chemicals or abrasive cleaners, touching up chips or scratches with primer, ensuring secure attachment points, and removing ice and snow gently during winter.
