The BMW Boot Lid/Tailgate Push-Button (part number 51247118158) is a crucial component for convenient access to your vehicle’s trunk. This genuine BMW part ensures reliable and smooth operation, allowing you to easily open and close the boot lid or tailgate with a simple push. Its high-quality construction guarantees durability and seamless integration with various BMW models.
Specifications
Here are the technical specifications for the BMW boot lid/tailgate push-button (part number 51247118158):
- Dimensions: 5.91 x 3.94 x 3.94 inches (15 x 10 x 10 cm)
- Weight: 0.704 ounces (20 grams)
- Material Composition: Primarily made of durable plastic with some metal components
Compatibility
Here are the BMW models compatible with the boot lid/tailgate push-button (part number 51247118158):
- 1 Series: 2011 (M Coupe E82)
- 3 Series: 2006-2011 (323i Sedan E90), 2006 (325i Sedan E90), 2006 (325xi Sedan E90, Wagon E91), 2007-2013 (328i Convertible E93, Coupe E92, Sedan E90, Wagon E91), 2009-2013 (328i xDrive Coupe E92, Sedan E90, Wagon E91), 2007-2008 (328xi Coupe E92, Sedan E90, Wagon E91), 2006 (330i Sedan E90)
- 5 Series: 2004-2015 (various models)
- M3: 2008-2013 (various models)
- X5: 2007-2013 (various models)
Installation Process
Here’s the step-by-step installation process for the BMW boot lid/tailgate push-button (part number 51247118158):
Tools Needed:
- Flathead screwdriver
- Torx screwdriver set
- Trim removal tool
- Gloves
- Safety glasses
Installation Steps:
-
Preparation:
- Park the vehicle on a flat surface and turn off the ignition.
- Wear gloves and safety glasses for protection.
-
Remove Interior Trim:
- Open the boot lid/tailgate.
- Use the trim removal tool to carefully pry off the interior trim panel of the boot lid.
-
Disconnect Electrical Connector:
- Locate the push-button assembly.
- Disconnect the electrical connector by pressing the release tab and pulling it apart.
-
Remove Old Push-Button:
- Use a Torx screwdriver to remove the screws securing the old push-button.
- Carefully pull out the old push-button from its housing.
-
Install New Push-Button:
- Insert the new push-button (part number 51247118158) into the housing.
- Secure it with the screws using the Torx screwdriver.
-
Reconnect Electrical Connector:
- Reconnect the electrical connector to the new push-button by aligning and pressing it until it clicks into place.
-
Reattach Interior Trim:
- Align the interior trim panel with the boot lid.
- Press it firmly to snap it back into place.
-
Test the Installation:
- Close the boot lid and test the new push-button to ensure it operates correctly.
Precautions:
- Ensure the vehicle is turned off and the keys are removed from the ignition.
- Handle the trim pieces carefully to avoid breaking any clips.
- Double-check all connections before reassembling the trim.
That’s it! Your new boot lid/tailgate push-button should be installed and functioning properly. If you encounter any issues, consult a professional mechanic.
Common Issues and Solutions
Here are some common issues with the BMW boot lid/tailgate push-button (part number 51247118158) and troubleshooting tips:
-
Non-Responsive Button:
- Issue: The button doesn’t respond when pressed.
- Troubleshooting: Check the wiring connections for any loose or damaged wires. Ensure the button is properly connected to the vehicle’s electrical system. If the wiring is intact, the button itself may need replacement.
-
Intermittent Operation:
- Issue: The button works sporadically.
- Troubleshooting: Inspect for moisture or dirt accumulation around the button. Clean the area thoroughly and ensure it is dry. Check for any signs of corrosion on the electrical contacts.
-
Button Sticking:
- Issue: The button gets stuck or is hard to press.
- Troubleshooting: Clean the button mechanism with a suitable cleaner to remove any debris or sticky substances. Lubricate the moving parts lightly if necessary.
-
Tailgate Not Opening:
- Issue: The tailgate doesn’t open even when the button is pressed.
- Troubleshooting: Verify the tailgate lock mechanism is functioning correctly. Check the fuse related to the tailgate release system. If the fuse is blown, replace it. Ensure the actuator is working properly.
-
Electrical Faults:
- Issue: Electrical issues causing the button to malfunction.
- Troubleshooting: Use a multimeter to check for continuity in the wiring. Inspect the vehicle’s control module for any error codes that might indicate a problem with the tailgate system.
If these steps don’t resolve the issue, it might be necessary to consult a professional mechanic or visit a BMW service center for a more thorough diagnosis.
Maintenance Tips
Here are some maintenance tips to ensure the longevity and optimal performance of your BMW boot lid/tailgate push-button (part number 51247118158):
- Regular Cleaning: Keep the push-button clean from dirt and debris. Use a soft cloth and mild cleaner to wipe it down regularly.
- Inspect Wiring: Periodically check the wiring connections for any signs of wear or damage. Ensure that the cables are properly routed and secured.
- Lubrication: Apply a small amount of silicone spray to the moving parts to prevent sticking and ensure smooth operation.
- Avoid Excessive Force: Use gentle pressure when operating the push-button to avoid unnecessary strain on the mechanism.
- Protect from Moisture: Ensure the area around the push-button is dry. If you notice any water ingress, address it promptly to prevent corrosion.
- Check for Software Updates: Ensure your vehicle’s software is up-to-date, as updates can sometimes improve the functionality of electronic components.
Following these tips can help maintain the functionality and extend the life of your BMW boot lid/tailgate push-button.
The BMW Boot Lid/Tailgate Push-Button
The BMW Boot Lid/Tailgate Push-Button (part number 51247118158) is a crucial component for convenient access to the vehicle’s trunk, ensuring reliable and smooth operation with a simple push.
It has high-quality construction, durable plastic with metal components, and measures 5.91 x 3.94 x 3.94 inches with a weight of 0.704 ounces.
Compatibility and Installation
Compatible with various BMW models including:
- 1 Series
- 3 Series
- 5 Series
- M3
- X5
from specific years. Installation requires tools such as a flathead screwdriver, Torx driver, and electrical connectors.
Troubleshooting Tips
Troubleshooting tips include:
- Checking wiring connections
- Insppecting for moisture or dirt accumulation
- Cleaning the button mechanism
- Lubricating moving parts
Maintenance and Upkeep
Regular maintenance involves:
- Regular cleaning
- Inspecting wiring
- Applying silicone spray to moving parts
- Avoiding excessive force
- Protecting from moisture
- Checking for software updates
