51368119961 – BMW Part Covering Left Installation, Maintenance, and Troubleshooting

51368119961 - BMW Part Covering Left Installation, Maintenance, and Troubleshooting

The BMW Part Covering Left 51368119961, also known as the window molding, is a genuine BMW part designed for the driver’s side rear window. This part plays a crucial role in vehicle maintenance by providing a protective seal and aesthetic enhancement to the rear side window. It ensures that the window is securely held in place, preventing water and debris from entering the vehicle.

Additionally, it contributes to the overall appearance of the car, maintaining its original look and finish. Proper installation and maintenance of this part are essential for preserving the vehicle’s structural integrity and preventing potential damage.

Product Specifications

Dimensions: 51368119961 is a rear left door window covering for BMW vehicles, specifically designed for models such as the E36 325is, E36 M3, E36 318is, and E36 328i.

Material: This part is made from high-quality plastic, ensuring durability and resistance to wear and tear.

Unique Features: It is a genuine BMW part, ensuring perfect fitment and compatibility with the vehicle. The covering is designed to protect the window mechanism and enhance the aesthetic appeal of the car’s interior.

Installation Process

Tools Required:

  • Flathead screwdriver

  • Trim removal tool

  • New BMW Part Covering left 51368119961

Precautions:

  • Ensure the vehicle is turned off and the keys are removed.

  • Use protective gloves to avoid injury.

  • Handle the trim and parts carefully to prevent damage.

Installation Steps:

  1. Open the Door: Start by opening the door where the covering will be installed.

  2. Remove the Old Covering: Use the flathead screwdriver to gently pry off the old covering. Insert the tool carefully under the edge and work your way around.

  3. Detach the Clips: Once the covering is loose, detach the clips holding it in place. Use the trim removal tool if necessary to avoid damaging the door panel.

  4. Clean the Area: Clean the area where the new covering will be installed.

    Remove any dirt or debris to ensure a smooth fit.

  5. Position the New Covering: Align the new BMW Part Covering left 51368119961 with the slot on the door. Ensure it is properly oriented.

  6. Secure the Covering: Press the new covering into place, starting from one end and working your way to the other. Ensure it is securely attached and there are no gaps.

  7. Reattach the Clips: Reattach any clips that were removed during the process.

    Make sure they are securely fastened.

  8. Test the Fit: Close and open the door to ensure the new covering is properly installed and there are no issues with the fit.

Final Check:

  • Inspect the installation to ensure everything is secure and properly aligned.

  • Test the door operation to ensure there are no obstructions or issues caused by the new covering.

By following these steps, you should be able to successfully install the BMW Part Covering left 51368119961.

Maintenance Tips

  1. Regular Cleaning: Clean the covering regularly with a mild detergent and water to remove dirt, grime, and other contaminants. Avoid using harsh chemicals that can damage the material.

  2. Avoid Abrasive Tools: Do not use abrasive tools or harsh scrubbers that can scratch or damage the surface of the covering.

  3. Protect from UV Rays: Use a UV protectant spray to shield the covering from harmful UV rays, which can cause fading and deterioration over time.

  4. Check for Damage: Inspect the covering periodically for any signs of wear, tear, or damage. Address any issues promptly to prevent further deterioration.

  5. Proper Installation: Ensure that the covering is installed correctly and securely to avoid any gaps or misalignment that can lead to water ingress or other issues.

  6. Avoid Excessive Heat: Keep the covering away from excessive heat sources, such as direct sunlight or heated surfaces, which can cause warping or damage.

  7. Use a Cover: When parking the vehicle for extended periods, consider using a car cover to protect the covering from environmental elements and potential damage.

  8. Follow Manufacturer Guidelines: Refer to the manufacturer’s guidelines for any specific care instructions or recommendations for maintaining the covering.

By following these tips, you can help ensure the longevity and optimal performance of your BMW Part Covering left 51368119961.

Troubleshooting

Common issues with the BMW Part Covering left 51368119961 include:

  1. Weathering and Wear: Over time, the covering can become brittle and crack due to exposure to UV rays, extreme temperatures, and other environmental factors.

  2. Loose or Missing Fasteners: The covering may become loose or fasteners might go missing, leading to improper fitment and potential water ingress.

  3. Water Leaks: Damage to the covering can result in water leaks, which can affect the interior of the vehicle.

  4. Fading: The color of the covering may fade, affecting the aesthetic appeal of the vehicle.

To troubleshoot these issues:

  1. Inspect for Cracks and Damage: Regularly check the covering for any visible cracks or damage. Replace it if necessary.

  2. Check Fasteners: Ensure all fasteners are secure and replace any missing ones.

  3. Test for Water Leaks: Perform a water test by spraying water on the covering to check for leaks. Address any leaks by replacing the damaged section.

  4. Use Protective Coatings: Apply UV protectant sprays to prevent weathering and fading.

By addressing these issues promptly, you can maintain the integrity and appearance of your BMW’s rear door window covering.

The BMW Part Covering Left 51368119961

The BMW Part Covering Left 51368119961 is a genuine BMW part designed for the driver’s side rear window, providing a protective seal and aesthetic enhancement to the vehicle. It ensures the window is securely held in place, preventing water and debris from entering the vehicle.

The part is made of high-quality plastic and is specifically designed for models such as the E36 325is, E36 M3, E36 318is, and E36 328i.

Installation

To install the covering, tools required include a flathead screwdriver, trim removal tool, and new BMW Part Covering left 51368119961. Precautions include ensuring the vehicle is turned off and keys removed, using protective gloves to avoid injury, and handling the trim and parts carefully to prevent damage.

The installation process involves:

  • Opening the door
  • Removing the old covering
  • Detaching clips
  • Cleaning the area
  • Positioning the new covering
  • Securing it in place
  • Reattaching clips
  • Testing the fit

Maintenance

Regular maintenance includes:

  • Cleaning the covering with mild detergent and water
  • Avoiding abrasive tools
  • Protecting from UV rays
  • Checking for damage
  • Ensuring proper installation
  • Avoiding excessive heat
  • Using a car cover when parking
  • Following manufacturer guidelines

Troubleshooting

Common issues with the part include:

  • Weathering and wear
  • Loose or missing fasteners
  • Water leaks
  • Fading

Troubleshooting involves:

  • Inspecting for cracks and damage
  • Checking fasteners
  • Testing for water leaks
  • Applying protective coatings

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

    We handle All types of Repairing issues.

    CarFXR: Your Ultimate BMW Parts & Repair Guide!
    OPEN (Always)
    Parts Finder
    Copyright ©2024 CarFXR. All Rights Reserved
    Contacts Part Categories Privacy Policy