The BMW Part Cover, wheel housing, front left 51717033749 is a crucial component in BMW vehicles. This part, also known as the fender liner, is located on the front left side of the vehicle, covering the wheel housing. Its primary function is to protect the wheel well and internal components from dirt, debris, water, and other environmental elements.
By doing so, it helps maintain the integrity of the vehicle’s suspension and braking systems, ensuring optimal performance and longevity. Additionally, it contributes to the overall aerodynamics and aesthetic appeal of the car. Proper maintenance and timely replacement of this part are essential for preserving the vehicle’s functionality and appearance.
Dimensions: The BMW Part Cover, wheel housing, front left 51717033749 has a weight of approximately 1.71 kg.
Materials Used: This part is made from high-quality plastic designed to withstand various environmental conditions and impacts.
Compatibility: This part is compatible with several BMW models, including the BMW 3 Series (E46) and BMW 5 Series (E39). It is a direct replacement for part number 51-71-8-193-809.
Preparation: Ensure the vehicle is parked on a flat surface and the engine is turned off. Engage the parking brake for safety.
Lift the Vehicle: Use a hydraulic jack to lift the front left side of the vehicle. Secure it with jack stands to ensure stability.
Remove the Wheel: Unscrew the lug nuts and remove the front left wheel to access the wheel housing.
Locate the Old Cover: Identify the front left wheel housing cover (part number 51717033749).
It is typically secured with clips or screws.
Remove the Old Cover: Carefully detach the clips or screws holding the old cover in place. Gently pull the cover away from the wheel housing.
Clean the Area: Wipe down the exposed area to remove any dirt or debris that could interfere with the installation of the new cover.
Position the New Cover: Align the new wheel housing cover (part number 51717033749) with the wheel housing. Ensure it is properly oriented.
Secure the New Cover: Use the clips or screws to attach the new cover to the wheel housing.
Make sure it is firmly in place and there are no gaps.
Reinstall the Wheel: Place the front left wheel back onto the hub and hand-tighten the lug nuts.
Lower the Vehicle: Carefully lower the vehicle back to the ground using the hydraulic jack. Remove the jack stands and fully tighten the lug nuts in a star pattern.
Final Check: Verify that the new cover is securely installed and there are no loose parts. Test the wheel for proper rotation and ensure there are no obstructions.
Test Drive: Take the vehicle for a short test drive to ensure everything is functioning correctly and there are no unusual noises or vibrations.
This process should ensure a smooth installation of the BMW Part Cover, wheel housing, front left 51717033749.
If you encounter any difficulties, it is advisable to consult a professional mechanic.
Cleaning: Use a gentle, non-abrasive cleaner specifically designed for automotive parts. Spray the cleaner on the wheel housing and let it sit for a few minutes. Use a soft brush to scrub away dirt and brake dust, then rinse thoroughly with water and dry with a clean cloth.
Periodic Checks: Inspect the wheel housing regularly for any signs of damage, such as cracks or corrosion.
Check for loose or missing fasteners and ensure they are tightened to the manufacturer’s specifications. Look for any debris or foreign objects that may have become lodged in the wheel housing and remove them promptly.
Lubrication: Apply a silicone-based lubricant to any moving parts or hinges within the wheel housing to ensure smooth operation and prevent rust.
Protective Coating: Consider applying a protective coating to the wheel housing to guard against dirt, moisture, and road salt, especially in areas with harsh weather conditions.
Professional Inspection: Have a professional mechanic inspect the wheel housing as part of your regular vehicle maintenance schedule to identify and address any potential issues early on.
Avoid Harsh Chemicals: Do not use harsh chemicals or abrasive tools that can damage the surface of the wheel housing.
Regular Cleaning Schedule: Establish a regular cleaning schedule to maintain the wheel housing in good condition. Clean it at least once a month or more frequently if you drive in dirty or salty conditions.
Check for Proper Fit: Ensure that the wheel housing is properly fitted and aligned to prevent any misalignment or damage to other components.
By following these tips, you can help ensure the longevity and functionality of your BMW wheel housing.
Common issues with the BMW Part Cover, Wheel Housing, Front Left (51717033749) include:
Cracks or Tears: The wheel housing cover can develop cracks or tears due to impacts with road debris or during parking.
Loose Fasteners: Fasteners securing the cover may become loose over time, leading to rattling noises or misalignment.
Water Leaks: Damage to the cover can allow water to seep into the wheel well, potentially causing rust or other damage to the wheel components.
Wear and Tear: Over time, the cover can wear out, especially in areas exposed to high levels of dirt and moisture.
Inspect for Cracks or Tears: Regularly check the wheel housing cover for any visible damage. If cracks or tears are found, replace the cover immediately to prevent further damage.
Tighten Fasteners: Periodically check and tighten the fasteners securing the cover. Use the appropriate tools to ensure they are securely fastened.
Seal and Protect: Apply a sealant or protective coating to the cover to prevent water leaks and rust.
Ensure the sealant is compatible with the cover material.
Replace Worn Parts: If the cover shows signs of significant wear and tear, replace it with a new one to maintain optimal performance and protection.
By addressing these issues promptly, you can ensure the longevity and functionality of your BMW’s wheel housing cover.
The BMW Part Cover, wheel housing, front left 51717033749 is a crucial component that protects the wheel well and internal components from dirt, debris, water, and other environmental elements. Its proper maintenance and timely replacement are essential for preserving the vehicle’s functionality and appearance.
The part has a weight of approximately 1.71 kg and is made from high-quality plastic designed to withstand various environmental conditions and impacts. It is compatible with several BMW models, including the BMW 3 Series (E46) and BMW 5 Series (E39).
Common issues with this part include cracks or tears, loose fasteners, water leaks, and wear and tear. Troubleshooting solutions involve inspecting for cracks or tears, tightening fasteners, sealing and protecting the cover, replacing worn parts, and addressing these issues promptly to ensure optimal performance and protection.
