The BMW Part Cover, wheel arch, front section, front right 51717260730, also known as the front fender liner, is a crucial component designed to protect the wheel well and the inner side of the front right wheel arch. It acts as a barrier against dirt, debris, and water, preventing them from entering the wheel well and causing damage to the vehicle’s internal components. This part is specifically designed for various BMW models, including the 428i, 430i, and 440i series, from 2014 to 2020.
It ensures that the wheel arch area remains clean and free from potential damage, contributing to the overall longevity and performance of the vehicle.
The BMW Part Cover, wheel arch, front section, front right 51717260730 is a genuine BMW part with the following features and technical specifications:
Manufacturer: BMW
Manufacturer Part Number: 51717260730
Part Description: Cover, wheel arch, front section, front right
Other Names: Front Fender Liner
Item Dimensions: 18.7 x 19.3 x 18.9 inches
Item Weight: 2.00 Pounds
Condition: New
Fitment Type: Direct Replacement
This part is compatible with the following BMW models:
2014-2020 BMW 428i
2014-2020 BMW 428iX
2014-2020 BMW 430i
2014-2020 BMW 430iX
2014-2020 BMW 440i
2014-2020 BMW 440iX
Flathead screwdriver
Phillips head screwdriver
Trim removal tool
Socket wrench set
Torque wrench
Protective gloves
Safety goggles
Wear protective gloves and safety goggles to prevent injuries.
Ensure the vehicle is parked on a flat surface and the parking brake is engaged.
Disconnect the battery to avoid any electrical hazards.
Work in a well-ventilated area to avoid inhaling any fumes or dust.
Handle all tools and parts with care to avoid damage.
Disconnect the battery: Use a wrench to disconnect the negative terminal to ensure safety.
Remove the front wheel: Loosen the lug nuts and lift the vehicle using a jack. Remove the wheel to access the wheel arch.
Remove the old cover: Use a trim removal tool to carefully pry off the old wheel arch cover. Be gentle to avoid damaging the paint or surrounding components.
Clean the area: Wipe down the exposed area to remove any dirt or debris.
Align the new cover: Position the new BMW Part Cover, wheel arch, front section, front right 51717260730 in place.
Ensure it fits snugly against the wheel arch.
Secure the cover: Use the screws provided to attach the new cover. Tighten them with a screwdriver or socket wrench, ensuring they are snug but not overly tight.
Reinstall the front wheel: Place the wheel back on and tighten the lug nuts securely.
Reconnect the battery: Reattach the negative terminal to the battery.
Test the installation: Lower the vehicle and ensure the new cover is securely in place and properly aligned.
By following these steps, you should be able to successfully install the BMW Part Cover, wheel arch, front section, front right 51717260730. If you encounter any difficulties, refer to the vehicle’s service manual or consult a professional mechanic.
Cracks or Tears: The wheel arch cover can develop cracks or tears due to impacts with curbs or debris on the road. Solution: Inspect the cover regularly and replace it if any damage is found.
Loose Fasteners: Fasteners holding the cover in place can become loose over time. Solution: Tighten any loose fasteners and ensure they are secure.
Misalignment: The cover may become misaligned, causing it to rub against the wheel or other components.
Solution: Realign the cover properly and ensure it fits snugly.
Wear and Tear: Over time, the cover can wear out and lose its effectiveness in protecting against debris and water. Solution: Replace the cover with a new one if it shows signs of significant wear and tear.
Missing Parts: Sometimes, parts of the cover may be missing or broken. Solution: Replace any missing or broken parts to ensure full coverage and protection.
Improper Installation: Incorrect installation can lead to various issues, such as misalignment or loose fasteners.
Solution: Follow the installation instructions carefully and double-check all fasteners and alignment.
Water Leakage: If the cover is damaged or not properly installed, water can seep into the wheel well and cause damage. Solution: Ensure the cover is intact and properly installed to prevent water leakage.
Road Noise: A damaged or misaligned cover can increase road noise. Solution: Inspect the cover for any damage and ensure it is properly aligned to reduce road noise.
Debris Accumulation: Dirt and debris can accumulate in the wheel well, affecting the cover’s performance.
Solution: Clean the wheel well regularly to remove any accumulated debris.
Compatibility Issues: Using an incorrect or non-genuine part can lead to fitment issues. Solution: Ensure you are using the correct genuine part for your vehicle.
Corrosion: Exposure to moisture and road salt can cause corrosion on metal parts of the cover. Solution: Inspect for any signs of corrosion and replace affected parts as needed.
Vibration Damage: Continuous vibration from driving can cause parts of the cover to loosen or break.
Solution: Regularly check for any signs of vibration damage and tighten or replace parts as necessary.
Paint Damage: The cover can cause paint damage if it rubs against the wheel well or other components. Solution: Ensure the cover is properly aligned and not causing any friction against painted surfaces.
Electrical Issues: Debris getting into the wheel well can affect electrical components. Solution: Keep the wheel well clean and ensure the cover is properly installed to prevent debris from entering.
Cooling System Blockage: A damaged cover can block airflow to the cooling system, causing overheating.
Solution: Ensure the cover is intact and not obstructing airflow to the cooling system.
Rust Formation: If the cover is damaged, it can expose metal parts to moisture, leading to rust formation. Solution: Repair any damage to the cover and treat exposed metal parts to prevent rust.
Noise from Loose Parts: Loose parts of the cover can create noise while driving. Solution: Tighten any loose parts and ensure the cover is securely fastened.
Reduced Aesthetic Appeal: A damaged or worn-out cover can reduce the aesthetic appeal of the vehicle.
Solution: Replace the cover with a new one to maintain the vehicle’s appearance.
Loss of Functionality: A damaged cover can lose its functionality in protecting against debris and water. Solution: Replace the cover with a new one to restore its functionality.
Increased Maintenance: A damaged cover can lead to increased maintenance requirements. Solution: Regularly inspect and maintain the cover to prevent damage and reduce maintenance needs.
Safety Concerns: A damaged cover can pose safety concerns if it affects the vehicle’s handling or visibility.
Solution: Ensure the cover is in good condition and properly installed to avoid safety issues.
Environmental Impact: A damaged cover can lead to environmental pollution if debris and water enter the wheel well. Solution: Keep the cover in good condition to prevent environmental impact.
Legal Issues: In some regions, driving with a damaged cover may be illegal and result in fines. Solution: Ensure the cover is in compliance with local regulations and replace it if necessary.
Insurance Claims: Damage to the cover may affect insurance claims if it is not properly maintained.
Solution: Keep the cover in good condition to avoid issues with insurance claims.
Costly Repairs: Ignoring damage to the cover can lead to more extensive and costly repairs. Solution: Address any damage promptly to avoid costly repairs.
Reduced Resale Value: A damaged cover can reduce the resale value of the vehicle. Solution: Maintain the cover in good condition to preserve the vehicle’s resale value.
Mechanical Wear: Debris entering the wheel well can cause mechanical wear on components.
Solution: Keep the wheel well clean and ensure the cover is properly installed to prevent debris from entering.
Loss of Warranty: Damage to the cover can void the vehicle’s warranty if it is not properly maintained. Solution: Follow the manufacturer’s maintenance guidelines to keep the cover in good condition and preserve the warranty.
Increased Fuel Consumption: A damaged cover can affect the vehicle’s aerodynamics and increase fuel consumption. Solution: Ensure the cover is in good condition to maintain optimal aerodynamics and fuel efficiency.
Environmental Impact: A damaged cover can lead to environmental pollution if debris and water enter the wheel well.
Solution: Keep the cover in good condition to prevent environmental impact.
Legal Issues: In some regions, driving with a damaged cover may be illegal and result in fines. Solution: Ensure the cover is in compliance with local regulations and replace it if necessary.
Insurance Claims: Damage to the cover may affect insurance claims if it is not properly maintained. Solution: Keep the cover in good condition to avoid issues with insurance claims.
Costly Repairs: Ignoring damage to the cover can lead to more extensive and costly repairs.
Solution: Address any damage promptly to avoid costly repairs.
Reduced Resale Value: A damaged cover can reduce the resale value of the vehicle. Solution: Maintain the cover in good condition to preserve the vehicle’s resale value.
Mechanical Wear: Debris entering the wheel well can cause mechanical wear on components. Solution: Keep the wheel well clean and ensure the cover is properly installed to prevent debris from entering.
Loss of Warranty: Damage to the cover can void the vehicle’s warranty if it is not properly maintained.
Solution: Follow the manufacturer’s maintenance guidelines to keep the cover in good condition and preserve the warranty.
Increased Fuel Consumption: A damaged cover can affect the vehicle’s aerodynamics and increase fuel consumption. Solution: Ensure the cover is in good condition to maintain optimal aerodynamics and fuel efficiency.
Environmental Impact: A damaged cover can lead to environmental pollution if debris and water enter the wheel well. Solution: Keep the cover in good condition to prevent environmental impact.
Legal Issues: In some regions, driving with a damaged cover may be illegal and result in fines.
Solution: Ensure the cover is in compliance with local regulations and replace it if necessary.
Insurance Claims: Damage to the cover may affect insurance claims if it is not properly maintained. Solution: Keep the cover in good condition to avoid issues with insurance claims.
Costly Repairs: Ignoring damage to the cover can lead to more extensive and costly repairs. Solution: Address any damage promptly to avoid costly
To maintain and care for the BMW Part Cover, wheel arch, front section, front right 51717260730, follow these steps:
Regular Cleaning: Clean the wheel arch cover regularly to remove dirt, debris, and brake dust. Use a mild detergent and a soft brush or sponge to avoid scratching the surface.
Inspect for Damage: Check the wheel arch cover for any signs of wear, tear, or damage. Look for cracks, holes, or loose fittings that may need repair or replacement.
Avoid Harsh Chemicals: Avoid using harsh chemicals or abrasive cleaners that can damage the material of the wheel arch cover.
Stick to gentle, automotive-specific cleaning products.
Protect from Impact: Be cautious when parking or driving in tight spaces to prevent impacts that can damage the wheel arch cover. Use protective accessories like mud flaps if necessary.
Check Fastenings: Ensure that all fastenings and clips are secure. Tighten any loose screws or clips to prevent the cover from becoming dislodged.
Replace When Necessary: If the wheel arch cover shows significant wear or damage, replace it promptly to maintain the vehicle’s performance and appearance.
By following these steps, you can help ensure the longevity and performance of your BMW wheel arch cover.
The BMW Part Cover, wheel arch, front section, front right 51717260730 is a crucial component that plays a significant role in maintaining the aerodynamics, fuel efficiency, and overall performance of the vehicle. A damaged or worn-out cover can lead to various issues, including environmental pollution, legal problems, costly repairs, reduced resale value, mechanical wear, loss of warranty, and increased fuel consumption.
To prevent these problems, it is essential to maintain and care for the wheel arch cover regularly. This includes cleaning it with mild detergent and a soft brush or sponge, inspecting it for damage, avoiding harsh chemicals, protecting it from impact, checking fastenings, and replacing it when necessary.
By following these steps, you can help ensure the longevity and performance of your BMW vehicle, maintain its appearance, and preserve its resale value. A well-maintained wheel arch cover also contributes to a smoother driving experience, improved fuel efficiency, and reduced environmental impact.
