The BMW Part Absorber, Engine Compartment Shielding 51717376342 is a crucial component designed to protect the engine bay of BMW vehicles. This shielding serves multiple purposes, including reducing engine noise, preventing debris from entering the engine compartment, and providing an additional layer of protection against road hazards. By effectively absorbing vibrations and insulating the engine bay, this part enhances the overall driving experience and contributes to the longevity of the vehicle’s engine components.
Does this cover what you were looking for?
The BMW Part Absorber, engine compartment shielding 51717376342 is a genuine BMW part designed to insulate the engine bay. Here are the technical specifications:
Materials Used: The part is made from high-quality, durable materials that provide effective sound and heat insulation.
Dimensions: The absorber measures approximately 48 inches in length, 18 inches in width, and 0.5 inches in thickness.
Compatibility: This part is compatible with various BMW models, including the 320i, 328d, 335i, 340i, 435i, and 435i Gran Coupe, among others, from the years 2012 to 2021.
Gather necessary tools: You will need a socket wrench set (including 8mm, 10mm, and 13mm sockets), a flathead screwdriver, a torque wrench, and a jack with jack stands.
Ensure safety: Park the vehicle on a flat surface, engage the parking brake, and disconnect the battery to prevent any electrical accidents. Wear safety gloves and eye protection.
Lift the vehicle: Use the jack to lift the front of the vehicle and secure it with jack stands. Ensure the vehicle is stable before proceeding.
Remove the old part: Locate the engine compartment shielding and remove any screws or bolts holding it in place using the appropriate socket wrench.
Carefully lower the old part once all fasteners are removed.
Clean the area: Thoroughly clean the area where the new part will be installed to ensure proper adhesion and fitment.
Install the new part: Align the new engine compartment shielding with the mounting points and secure it using the screws or bolts. Use the torque wrench to tighten the fasteners to the manufacturer’s specified torque.
Reconnect the battery: Reconnect the vehicle’s battery and ensure all tools are removed from under the vehicle.
Test the installation: Lower the vehicle from the jack stands and start the engine. Check for any unusual noises or vibrations to ensure the new part is installed correctly.
Final inspection: Perform a final inspection to ensure all fasteners are secure and the new part is properly installed.
Dispose of old part: Properly dispose of the old engine compartment shielding according to local regulations.
By following these steps, you can successfully install the BMW Part Absorber, engine compartment shielding 51717376342.
To maintain the BMW Part Absorber, engine compartment shielding 51717376342, follow these steps:
Cleaning: Use a mild detergent and water to clean the absorber. Avoid using harsh chemicals or abrasive materials that could damage the surface. Rinse thoroughly and dry with a soft cloth.
Checking for Wear and Tear: Inspect the absorber regularly for any signs of damage, such as cracks, holes, or rust.
Pay special attention to areas where it is bolted or attached to the vehicle.
Ensuring Longevity: To prolong the life of the absorber, ensure it is properly secured and not loose. Check the mounting points and bolts for tightness. If any parts are damaged or missing, replace them promptly.
Protective Measures: Consider applying a protective coating or paint to the absorber to prevent rust and corrosion.
This can help extend its lifespan, especially if you live in an area with harsh weather conditions.
Regular Inspections: Make it a habit to inspect the absorber during routine maintenance checks. This will help you catch any issues early and address them before they become major problems.
By following these steps, you can keep your BMW Part Absorber in good condition and ensure it continues to perform effectively.
Rust and Corrosion: Over time, the absorber may develop rust and corrosion, especially in areas exposed to moisture and road salt.
Solution: Regularly inspect the absorber for any signs of rust. If rust is found, sand the affected area, apply a rust converter, and repaint it with a high-quality automotive paint.
Loose or Missing Fasteners: The absorber may become loose or fasteners may go missing, leading to reduced effectiveness.
Solution: Check all fasteners periodically and tighten any that are loose. Replace any missing fasteners with new ones from a BMW dealer or an auto parts store.
Cracks or Damage: The absorber can get damaged due to impacts or debris, causing cracks or holes.
Solution: Inspect the absorber for any cracks or damage.
If found, repair the damage using a suitable adhesive or replace the absorber if the damage is extensive.
Improper Installation: Incorrect installation can lead to improper fitment and reduced effectiveness.
Solution: Ensure the absorber is installed correctly according to the manufacturer’s instructions. If unsure, seek assistance from a professional mechanic.
Wear and Tear: Continuous use can lead to wear and tear, reducing the absorber’s ability to protect the engine compartment.
Solution: Regularly inspect the absorber for signs of wear and tear. Replace it if it shows significant signs of deterioration.
Noise: A loose absorber can create noise when driving, especially over rough terrain.
Solution: Tighten all fasteners and ensure the absorber is securely in place.
If the noise persists, inspect for any damage and repair or replace as necessary.
Compatibility Issues: Using an incorrect or aftermarket absorber can lead to compatibility issues.
Solution: Always use genuine BMW parts or ensure aftermarket parts are compatible with your specific BMW model.
Improper Cleaning: Using harsh chemicals or improper cleaning methods can damage the absorber.
Solution: Clean the absorber with mild soap and water. Avoid using harsh chemicals or abrasive materials that can damage the surface.
Exposure to Extreme Temperatures: Extreme heat or cold can affect the absorber’s material and performance.
Solution: Park the vehicle in a garage or shaded area when possible to minimize exposure to extreme temperatures.
Debris Accumulation: Leaves, dirt, and other debris can accumulate under the absorber, causing moisture retention and potential rust.
Solution: Regularly clean the area under the absorber to remove any accumulated debris and ensure proper ventilation.
By addressing these common issues, you can maintain the effectiveness and longevity of the BMW Part Absorber, Engine Compartment Shielding 51717376342.
The BMW Part Absorber, Engine Compartment Shielding 51717376342 is a crucial component designed to protect the engine bay of BMW vehicles. It serves multiple purposes, including reducing engine noise, preventing debris from entering the engine compartment, and providing an additional layer of protection against road hazards.
The part is made from high-quality materials that provide effective sound and heat insulation. It measures approximately 48 inches in length and is designed to fit specific BMW models.
Regular maintenance and inspections are necessary to ensure its effectiveness and longevity. This includes checking for common issues such as:
Addressing these issues can help maintain the absorber’s performance and extend its lifespan.
