The BMW Blind Plug (part number 51718126605) is a small but essential component used in various BMW models. Its primary purpose is to cover and seal unused holes in the vehicle’s body, preventing dirt, moisture, and debris from entering. This helps maintain the integrity and appearance of the vehicle, ensuring it remains in optimal condition.
Specifications
BMW Blind Plug (Part Number: 51718126605)
- Dimensions: Diameter = 25 mm.
- Material Composition: Genuine BMW part, specific material not detailed.
- Weight: 0.20 pounds.
- Fitment: Direct replacement for various BMW models from 1989-2015.
- Replaces: Part number 51-71-1-956-921.
- Warranty: 12 months or 12,000 miles.
For more detailed fitment information, please refer to the specific vehicle model.
Compatibility
Here are the BMW models and years compatible with the blind plug (part number 51718126605), including variations in fitment:
-
1 Series:
- 2011: 1 Series M Coupe (E82)
- 2008-2013: 128i Convertible (E88), 128i Coupe (E82), 135i Convertible (E88), 135i Coupe (E82)
-
3 Series:
- 1992-1998: 318i Convertible (E36), 318i Sedan (E36)
- 1992-1999: 318is Coupe (E36)
- 1995-1999: 318ti Hatchback (E36)
- 2001-2005, 1993-1995: 320i Sedan (E36, E46)
- 1998-2000, 2006-2011: 323i Convertible (E36), 323i Sedan (E46, E90), 323i Wagon (E46)
- 1998-1999: 323is Coupe (E36)
- 1996-2013: 328i (various body styles and engines)
- 1995-2013: M3 (various body styles and engines)
-
5 Series:
- 1989-1995: 525i Sedan (E34)
- 1996-2003: 528i Sedan (E39)
- 2004-2010: 530i Sedan (E60)
- 2004-2010: 545i Sedan (E60)
- 2004-2010: 550i Sedan (E60)
- 2004-2010: M5 Sedan (E60)
-
X Series:
- 2004-2010: X3 (E83)
- 2000-2013: X5 (E53, E70)
- 2008-2014: X6 (E71)
- 2008-2014: X6M (E71)
-
Z Series:
- 2003-2008: Z4 (E85, E86)
- 2006-2008: Z4M (E85, E86)
-
Other Models:
- 1995-2001: 740i Sedan (E38)
- 1995-2001: 750i Sedan (E38)
- 2004-2010: 645Ci Coupe (E63)
- 2004-2010: 650i Coupe (E63)
- 2004-2010: M6 Coupe (E63)
These models cover a range of body styles and engines, ensuring broad compatibility.
Installation Process
Here’s a step-by-step guide for installing the BMW blind plug (part number 51718126605):
Tools Needed:
- Flathead screwdriver
- Clean cloth
- Protective gloves
Steps:
-
Preparation:
- Park your vehicle on a flat surface and turn off the engine.
- Wear protective gloves to avoid any injuries.
-
Locate the Installation Area:
- Identify the hole or opening where the blind plug will be installed. This is typically found in the body panel or undercarriage.
-
Clean the Area:
- Use a clean cloth to wipe the area around the hole. Ensure it is free from dirt and debris to ensure a secure fit.
-
Align the Plug:
- Take the blind plug and align it with the hole. The plug should fit snugly into the opening.
-
Insert the Plug:
- Gently press the plug into the hole. Use a flathead screwdriver if necessary to push the edges of the plug into place. Be careful not to damage the plug or the surrounding area.
-
Check the Fit:
- Ensure the plug is flush with the surface and securely in place. It should not be loose or protruding.
Precautions:
- Avoid Excessive Force: Do not use excessive force when inserting the plug to prevent damage.
- Double-Check Fitment: Ensure the plug is the correct size and type for your specific BMW model.
That’s it! Your blind plug should now be properly installed. If you encounter any issues, consult your vehicle’s manual or a professional mechanic for assistance.
Benefits
The BMW blind plug (part number 51718126605) offers several benefits:
- Protection: It seals unused holes in the vehicle body, preventing dirt, moisture, and debris from entering, which helps protect internal components from damage.
- Aesthetic Improvement: It provides a clean and finished look by covering holes, enhancing the overall appearance of the vehicle.
- Corrosion Prevention: By sealing off openings, it helps prevent rust and corrosion in areas that could be exposed to the elements.
These benefits contribute to maintaining the vehicle’s performance and longevity.
The BMW Blind Plug
The BMW Blind Plug (part number 51718126605) is an essential component used in various BMW models to seal unused holes, preventing dirt, moisture, and debris from entering the vehicle’s body.
It maintains the integrity and appearance of the vehicle, ensuring optimal condition. The plug has a diameter of 25 mm, weighs 0.20 pounds, and is made of genuine BMW material.
It offers protection, aesthetic improvement, and corrosion prevention benefits, contributing to maintaining the vehicle’s performance and longevity.
Compatible with various BMW models from 1989-2015, including:
- 1 Series
- 3 Series
- 5 Series
- X Series
- Z Series
- Other models
