The BMW Part Rotary Clip 51757163899 is a small yet crucial component in various BMW models. This genuine BMW part, also known as the cover clip or under cover clip, is designed to secure different underhood components. Its primary function is to ensure that parts like the engine cover, air intake system, and other critical components remain firmly in place, preventing potential damage or malfunction.
Common applications of the Rotary Clip 51757163899 include its use in models such as the BMW 1 Series, 3 Series, and X2.
By maintaining the stability and integrity of various engine components, this clip plays a significant role in the overall performance and longevity of the vehicle.
Would you like to know more about its specific applications in a particular BMW model?
The BMW Part Rotary Clip 51757163899 is a genuine BMW component used as a cover clip or under cover clip for various BMW models. It is made from high-quality plastic material, ensuring durability and resistance to wear and tear. The clip measures approximately 2.5 inches in length and 0.5 inches in width, with a thickness of about 0.1 inches.
This rotary clip features a unique design that allows it to securely fasten components in place, preventing them from moving or becoming dislodged during vehicle operation.
It is specifically designed for direct replacement, making it easy to install without any modifications. The clip is also lightweight, weighing around 0.20 pounds, which helps in maintaining the overall balance and performance of the vehicle.
Gather Tools: You will need a flathead screwdriver or a trim removal tool, and possibly a pair of needle-nose pliers.
Locate the Clip: The rotary clip is typically found under the hood, securing the splash shield or under cover.
Remove the Old Clip: Use the flathead screwdriver or trim removal tool to gently pry the old clip out of its slot. Be careful not to damage the surrounding components.
Insert the New Clip: Align the new rotary clip with the slot and press it firmly into place until it clicks.
Check for Security: Ensure the new clip is securely fastened and the splash shield or under cover is properly held in place.
Potential Challenges:
Access: The clip may be in a tight or hard-to-reach spot, making it difficult to use the tools effectively.
Alignment: Properly aligning the new clip can be tricky, especially if the slot is small or the clip is tight.
Avoiding Damage: There is a risk of damaging the surrounding components or the clip itself if too much force is applied.
To maintain the BMW Part Rotary Clip 51757163899, follow these tips:
Remove the clip: Carefully detach the rotary clip from its position.
Clean with mild detergent: Use a soft brush and mild detergent to clean off dirt and debris.
Rinse thoroughly: Rinse with clean water to remove any soap residue.
Dry completely: Allow the clip to air dry or use a clean cloth to dry it completely before reinstallation.
Check for wear and tear: Examine the clip for any signs of damage, such as cracks or bends.
Look for corrosion: Inspect for rust or corrosion, especially if the vehicle is exposed to harsh weather conditions.
Test flexibility: Ensure the clip is still flexible and not brittle.
Purchase a genuine replacement: Always use a genuine BMW part to ensure compatibility and durability.
Follow the installation guide: Refer to the vehicle’s service manual for proper installation instructions.
Securely fasten the new clip: Make sure the new clip is securely fastened in its position to avoid any loose parts.
Regular maintenance and timely replacement of worn parts will help keep your BMW running smoothly. If you’re unsure about any step, consulting a professional mechanic is always a good idea.
Issue: Clip is missing or lost
Identification: Check under the vehicle, especially around the oil drain plug area.
Diagnosis: Verify if the clip is indeed missing.
Fix: Replace the missing clip with a new one (part number 51757163899).
Issue: Clip is broken or damaged
Identification: Inspect the clip for any visible cracks or breaks.
Diagnosis: Confirm the damage by attempting to reattach the clip.
Fix: Replace the broken clip with a new one (part number 51757163899).
Issue: Clip does not fit properly
Identification: Check if the clip is the correct part for your vehicle model.
Diagnosis: Compare the clip with the original part or consult the vehicle manual.
Fix: Ensure you have the correct part number (51757163899) and replace it if necessary.
Issue: Clip is loose or falls off
Identification: Observe if the clip stays in place when the vehicle is in motion.
Diagnosis: Check the fitment and condition of the clip.
Fix: Tighten or replace the clip with a new one (part number 51757163899) if it is worn out.
Issue: Clip causes rattling noise
Identification: Listen for unusual noises coming from the underhood area.
Diagnosis: Inspect the clip and surrounding components for any loose parts.
Fix: Secure the clip properly or replace it with a new one (part number 51757163899) if it is damaged.
Issue: Clip is corroded or rusted
Identification: Look for signs of corrosion or rust on the clip.
Diagnosis: Check the extent of the corrosion.
Fix: Clean the clip with a rust remover or replace it with a new one (part number 51757163899) if it is severely corroded.
Issue: Clip is not available
Identification: Check availability at local or online auto parts stores.
Diagnosis: Verify if the part is in stock or if there are any alternatives.
Fix: Order the clip (part number 51757163899) from a reliable supplier or consider compatible alternatives if necessary.
The BMW Part Rotary Clip 51757163899 is a crucial component in various BMW models, ensuring engine components remain firmly in place. Its applications include the 1 Series, 3 Series, and X2.
Made from high-quality plastic material, this clip measures approximately 2.5 inches in length and 0.5 inches in width. It features a unique design for secure fastening and is designed for direct replacement.
Regular maintenance and timely replacement of worn parts will help keep your BMW running smoothly. To maintain the clip, clean it with mild detergent, inspect for wear and tear, and replace it if necessary.
If you’re unsure about any step, consulting a professional mechanic is always a good idea.
