The BMW part adjuster 51767183752 is a hood adjuster used to make slight adjustments to the height of the hood when it is closed. This ensures a proper fit and alignment, which is crucial for maintaining the vehicle’s aerodynamics, safety, and overall aesthetic appeal. Proper hood alignment also helps prevent damage to the hood and other components, contributing to the longevity and performance of BMW vehicles.
Specifications
BMW Part Adjuster 51767183752:
- Dimensions: Not explicitly listed.
- Materials: High-quality materials ensuring durability and reliability.
- Compatibility:
- BMW 228i (2014-2016, F22/F23)
- BMW 230i (2017-2020, F22/F23)
- BMW 320i (2013-2018, F30)
- BMW 328i (2012-2016, F30/F31)
- BMW 328d (2014-2018, F30/F31)
- BMW 330i (2017-2020, F30)
- BMW 335i (2013-2015, F30)
- BMW 340i (2016-2018, F30)
- BMW M3 (2015-2018, F80)
- BMW X3 (2011-2020, F25)
- BMW X5 (2014-2020, F15)
- BMW X6 (2015-2019, F16)
- BMW X7 (2019-2020, G07)
- BMW Z4 (2019-2020, G29)
- BMW M4 (2015-2020, F82/F83)
- BMW M5 (2012-2016, F10)
- BMW M6 (2012-2018, F12/F13)
- BMW 7 Series (2009-2015, F01/F02)
- BMW 8 Series (2019-2020, G14/G15)
- BMW i3 (2014-2020, I01)
- BMW i8 (2014-2020, I12)
This part is a direct replacement for part number 51-76-7-348-121.
Installation Process
Here’s the step-by-step process for installing the BMW part adjuster (51767183752):
Tools Needed:
- Flathead screwdriver
- Ratchet with socket set
- Torque wrench
- Safety gloves
- Safety goggles
Safety Precautions:
- Wear safety gloves and goggles to protect your hands and eyes.
- Ensure the car is parked on a flat surface and the engine is off.
- Disconnect the battery to avoid any electrical hazards.
Installation Steps:
- Open the hood and locate the existing hood adjuster.
- Use a flathead screwdriver to carefully remove the old adjuster by prying it out.
- Clean the area where the new adjuster will be installed to ensure a proper fit.
- Insert the new adjuster (part 51767183752) into the designated slot.
- Use a ratchet with the appropriate socket to tighten the adjuster. Ensure it is snug but not overly tight.
- Adjust the height of the hood by turning the adjuster until the hood aligns properly with the body lines.
- Use a torque wrench to ensure the adjuster is tightened to the manufacturer’s specified torque setting.
- Close the hood and check for proper alignment and fit.
- Reconnect the battery and ensure all tools are removed from the engine bay.
That’s it! Your new hood adjuster should now be properly installed. If you have any issues, consult a professional mechanic.
Common Issues and Solutions
Common Problems with BMW Adjuster (Part #51767183752)
-
Hood Misalignment:
- Problem: The hood may sit too low or too high, causing misalignment with the body lines.
- Solution: Adjust the height of the hood adjuster to ensure it aligns properly with the body lines.
-
Wear and Tear:
- Problem: Over time, the adjuster can wear out, leading to a loose or unstable hood.
- Solution: Regularly inspect the adjuster for signs of wear and replace it if necessary.
-
Corrosion:
- Problem: Exposure to the elements can cause the adjuster to corrode, affecting its functionality.
- Solution: Apply anti-corrosion spray to the adjuster and keep it clean to prevent rust.
-
Failure to Hold Position:
- Problem: The adjuster may fail to hold the hood in the correct position, causing it to drop or not close properly.
- Solution: Tighten the adjuster or replace it if it can no longer maintain the correct position.
Troubleshooting Tips
- Regular Maintenance: Periodically check the adjuster for any signs of damage or wear.
- Lubrication: Apply lubricant to the adjuster to ensure smooth operation.
- Replacement: If the adjuster is damaged or worn out, replace it with a new one to maintain proper hood alignment and functionality.
If you encounter persistent issues, consulting a professional mechanic or BMW service center is recommended for a thorough inspection and repair.
Maintenance Tips
To maintain the BMW part adjuster (51767183752) for longevity and optimal performance:
- Regular Cleaning: Keep the adjuster free from dirt and debris. Use a soft cloth and mild cleaner.
- Lubrication: Apply a small amount of silicone-based lubricant to the moving parts to prevent rust and ensure smooth operation.
- Inspection: Regularly check for signs of wear or damage. Replace if any cracks or significant wear are noticed.
- Proper Adjustment: Ensure the adjuster is correctly aligned and tightened to avoid unnecessary strain.
- Avoid Overloading: Do not apply excessive force or weight on the hood, as this can damage the adjuster.
Following these steps will help keep your adjuster in top condition.
The BMW Part Adjuster 51767183752: Ensuring Proper Hood Alignment
The BMW part adjuster 51767183752 is crucial for maintaining proper hood alignment, aerodynamics, safety, and aesthetic appeal of BMW vehicles. It ensures a snug fit between the hood and body lines, preventing damage to components and contributing to the vehicle’s longevity and performance.
This direct replacement part is compatible with various BMW models (2011-2020) and comes with high-quality materials for durability and reliability.
Maintenance Tips
Regular maintenance, lubrication, and inspection are essential to prevent wear and tear, corrosion, and failure to hold position. By following these steps, you can maintain the adjuster’s optimal performance and ensure your vehicle runs smoothly.
