The Original BMW AGM-battery 61217555719 is a high-performance Absorbed Glass Mat (AGM) battery designed specifically for BMW vehicles. This battery is known for its superior power output, durability, and reliability, making it an essential component in ensuring the optimal performance of BMW cars. It is used in a wide range of BMW models, from sedans to SUVs, and is crucial for providing the necessary electrical power to start the engine and support various electronic systems in the vehicle.
The AGM technology also offers better resistance to vibration and shock, enhancing the overall longevity and efficiency of the battery.
Does this cover what you were looking for?
The BMW Original AGM-battery 61217555719 is a high-performance Absorbed Glass Mat (AGM) battery designed specifically for BMW vehicles. It boasts an impressive 80 AH capacity, ensuring reliable power for starting the engine and running various electrical components. The AGM technology offers several advantages over traditional lead-acid batteries, including enhanced durability, leak-proof design, and better performance in extreme temperatures.
Additionally, the AGM battery can be recharged even after deep discharge, making it highly efficient and long-lasting. This battery is a direct replacement, ensuring a perfect fit and optimal performance for your BMW.
Ensure Safety: Disconnect the negative battery cable first, then the positive battery cable.
Remove Old Battery: Unscrew the battery hold-down clamp and remove it. Carefully lift the old battery out of the tray.
Clean Battery Tray: Clean any corrosion or debris from the battery tray and terminals.
Position New Battery: Place the new AGM battery (part number 61217555719) into the battery tray.
Secure Battery: Reattach the battery hold-down clamp and tighten the screws.
Connect Cables: Connect the positive battery cable first, then the negative battery cable.
Test: Start the vehicle to ensure the new battery is functioning properly.
Regular Inspection: Check the battery terminals and cables for any signs of corrosion or wear. Clean any corrosion with a mixture of baking soda and water, and ensure the connections are tight.
Proper Charging: Use a BMW-approved charger to maintain the battery’s charge level, especially if the vehicle is not used frequently. Avoid overcharging, as it can damage the battery.
Temperature Control: Keep the battery in a cool, dry place.
Extreme temperatures can affect the battery’s performance and lifespan. If possible, park the vehicle in a garage or shaded area.
Avoid Deep Discharges: Try to prevent the battery from being completely discharged. If the battery is frequently drained, it can shorten its lifespan.
Consider using a trickle charger if the vehicle is not in use for extended periods.
Regular Testing: Have the battery tested periodically by a professional to ensure it is holding a proper charge and functioning efficiently. This can help identify potential issues before they become major problems.
Follow Manufacturer Guidelines: Refer to the BMW owner’s manual for specific maintenance recommendations and schedules. Following the manufacturer’s guidelines can help ensure the battery’s longevity and optimal performance.
Secure Mounting: Ensure the battery is securely mounted in its tray to prevent any movement or vibration.
A loose battery can suffer from internal damage and reduced performance.
Avoid Short Trips: Short trips can prevent the battery from fully charging. Try to take longer drives occasionally to allow the battery to recharge fully.
Use Quality Accessories: When replacing or upgrading any components related to the battery, use genuine BMW parts or high-quality aftermarket parts to ensure compatibility and reliability.
Monitor Battery Health: Keep an eye on the battery’s health through the vehicle’s onboard diagnostics system, if available. This can provide early warnings of potential issues and help maintain optimal performance.
By following these tips, you can help ensure the longevity and optimal performance of your BMW AGM battery.
Common issues with the ‘BMW Part Original BMW AGM-battery 61217555719‘ include:
Battery not holding a charge: This can be due to sulfation, where lead sulfate crystals build up on the battery plates, reducing its ability to hold a charge.
Solution: Use a desulfator or a battery charger with a desulfation mode to break down the lead sulfate crystals.
Slow engine crank: If the battery is weak, it may not provide enough power to crank the engine quickly.
Solution: Test the battery’s voltage and replace it if it’s below the recommended level. Ensure the battery terminals are clean and securely connected.
Battery drain when vehicle is off: This can be caused by a parasitic draw, where an electrical component continues to draw power even when the vehicle is off.
Solution: Use a multimeter to check for a parasitic draw and identify the faulty component. Disconnect the battery when the vehicle is not in use to prevent complete discharge.
Swollen battery case: Overcharging or exposure to high temperatures can cause the battery case to swell.
Solution: Replace the battery immediately to prevent potential leaks or explosions.
Check the charging system for faults.
Shortened battery life: Frequent short trips or exposure to extreme temperatures can reduce the battery’s lifespan.
Solution: Use a battery maintainer or trickle charger to keep the battery charged during periods of inactivity. Park the vehicle in a garage or shaded area to protect it from extreme temperatures.
Corroded battery terminals: Corrosion on the terminals can impede the flow of electricity.
Solution: Clean the terminals with a mixture of baking soda and water, then rinse and dry them thoroughly. Apply a terminal protector to prevent future corrosion.
Battery failure in cold weather: AGM batteries can struggle in extremely cold temperatures.
Solution: Use an insulated battery blanket or a block heater to keep the battery warm.
Ensure the battery is fully charged before the onset of cold weather.
Incorrect battery installation: Installing the battery incorrectly can lead to poor performance or damage.
Solution: Follow the manufacturer’s installation instructions carefully. Ensure the battery is securely fastened and the terminals are connected correctly.
Faulty battery management system (BMS): The BMS monitors and controls the battery’s state of charge and health.
Solution: Have the BMS checked by a professional. Replace the battery if the BMS is found to be faulty.
Water loss in non-sealed batteries: Although AGM batteries are sealed, improper handling can lead to water loss.
Solution: Ensure the battery is handled properly and avoid overcharging, which can cause excessive heat and water loss.
By addressing these issues promptly, you can extend the life of your BMW AGM battery and ensure optimal performance.
Positive Feedback:
Customers appreciate the high quality and reliability of the Original BMW AGM-battery 61217555719.
Many reviewers highlight its long-lasting performance and consistent power delivery.
Users have noted that it fits perfectly and is an easy replacement for their BMW models.
The manufacturer’s warranty and hassle-free return policy are also well-received.
Criticisms:
Some customers have mentioned that the battery is expensive compared to other options.
A few users have experienced shorter than expected lifespan in certain conditions.
There are occasional complaints about shipping delays and packaging issues.
The BMW Part Original BMW AGM-battery 61217555719 is a high-quality battery designed specifically for BMW vehicles, offering reliable and long-lasting performance. To ensure optimal battery life, it’s essential to address common issues such as weak batteries, parasitic draws, swollen cases, shortened lifespan, corroded terminals, cold weather failure, incorrect installation, faulty BMS, and water loss in non-sealed batteries.
By being aware of these potential problems and taking proactive steps to prevent or resolve them, BMW owners can extend the life of their AGM battery and maintain optimal performance. The Original BMW AGM-battery 61217555719 is a reliable choice for those seeking a high-quality replacement that meets the manufacturer’s standards.
Customers appreciate the high quality and reliability of this battery, as well as its long-lasting performance and consistent power delivery. Many reviewers have noted that it fits perfectly and is an easy replacement for their BMW models. The manufacturer’s warranty and hassle-free return policy are also well-received.
While some customers have mentioned that the battery is expensive compared to other options, and a few users have experienced shorter than expected lifespan in certain conditions, these issues can be mitigated by proper maintenance and handling. Occasional complaints about shipping delays and packaging issues should not deter potential buyers from considering this high-quality product.
In conclusion, the BMW Part Original BMW AGM-battery 61217555719 is a valuable investment for BMW owners seeking reliable and long-lasting performance. By addressing common battery-related issues and choosing a high-quality replacement like this one, drivers can ensure their vehicle runs smoothly and efficiently.
