The headlight-left-replacement-part”>BMW Part Bracket Headlight Left 63126949633 is a crucial component in BMW vehicles, specifically designed to secure the left headlight in place. This bracket ensures that the headlight remains stable and properly aligned, which is essential for optimal visibility and safety while driving. It is made from high-quality materials to withstand various driving conditions and maintain its integrity over time.
Using genuine BMW parts like this bracket helps maintain the vehicle’s performance and safety standards, providing peace of mind to drivers.
The BMW Part Bracket headlight left 63126949633 is a genuine BMW part designed for the driver side. It is a direct replacement for part number 63-12-6-929-307. The part is made from high-quality materials to ensure durability and performance.
Dimensions:
Weight: 0.80 pounds
Compatibility:
Fits various BMW models from 2004 to 2010, including the BMW 525i and BMW 528i.
Materials Used:
The bracket is constructed from robust materials suitable for withstanding the rigors of road use.
3/8″ or 1/4″ drive socket wrench
3/8″ or 1/4″ socket extension (6″ length)
8mm or 5/16″ socket
Flathead screwdriver
Phillips screwdriver
Wire strippers
Crimping tool
Crimps
Scissors
Bit of grease for the socket
Torch
Ensure the vehicle is parked on a flat surface and the parking brake is engaged.
Disconnect the battery to prevent electrical shock.
Wear safety gloves and eye protection.
Use a jack and jack stands to lift the vehicle if necessary, ensuring it is securely supported.
Handle all tools and parts with care to avoid injury.
Disconnect the Battery: Disconnect the negative terminal of the battery to ensure safety.
Remove the Old Bracket: Use the Phillips screwdriver to remove the screws securing the old headlight bracket. Keep the screws in a safe place.
Detach the Headlight: Carefully remove the headlight assembly from the vehicle. You may need to disconnect the wiring harness and any other connectors.
Prepare the New Bracket: Apply a bit of grease to the new bracket’s screw holes to make installation easier.
Attach the New Bracket: Position the new bracket in place and secure it with the screws you removed earlier.
Use the socket wrench and extension to tighten them.
Reconnect the Headlight: Reattach the headlight assembly to the new bracket. Ensure all connectors are properly secured.
Reconnect the Battery: Reconnect the negative terminal of the battery.
Test the Headlight: Turn on the headlights to ensure they are working correctly and properly aligned.
Ensure all screws are tightened securely.
Check for any loose connections or wiring.
Test the headlight functionality and alignment.
By following these steps, you should be able to successfully install the BMW Part Bracket headlight left 63126949633. If you encounter any issues, refer to the vehicle’s service manual or consult a professional mechanic.
To ensure the longevity and optimal performance of the BMW Part Bracket headlight left 63126949633, follow these maintenance tips:
Cleaning Methods:
Regular Cleaning: Clean the headlight lens regularly using a mild detergent and water. Avoid using abrasive cleaners that can scratch the lens.
Polishing: Use a headlight polishing kit to remove oxidation and restore clarity. Apply a polishing compound with a soft cloth or a polishing tool, following the manufacturer’s instructions.
Protective Coating: Apply a UV-resistant protective coating to prevent future oxidation and yellowing.
Periodic Checks:
Inspect for Damage: Check the headlight bracket and lens for any cracks, chips, or signs of wear.
Replace damaged parts immediately to prevent further issues.
Check Alignment: Ensure the headlight is properly aligned for optimal visibility. Misaligned headlights can reduce visibility and cause glare for other drivers.
Test Functionality: Regularly test the headlight to ensure it is working correctly. Check the brightness and any adaptive features if applicable.
Clean Washer Nozzles: If your vehicle has headlight washers, clean the nozzles and ensure they are not clogged to maintain effective cleaning.
By following these maintenance tips, you can help extend the life of your BMW headlight bracket and ensure it continues to perform at its best.
Common issues with the BMW Part Bracket headlight left 63126949633 include:
Loose or misaligned bracket: This can cause the headlight to shift or not stay in place properly.
Solution: Ensure the bracket is securely fastened and properly aligned. Check for any missing or damaged mounting hardware and replace if necessary.
Cracks or breaks in the bracket: Over time, the bracket can develop cracks or breaks, compromising its structural integrity.
Solution: Inspect the bracket for any visible damage. If cracks or breaks are found, replace the bracket with a new one.
Corrosion or rust: Exposure to moisture and road salt can cause corrosion or rust to form on the bracket.
Solution: Clean the bracket thoroughly and apply a rust-resistant coating.
If the corrosion is severe, replace the bracket.
Wear and tear: Continuous use and vibrations can lead to wear and tear on the bracket.
Solution: Regularly inspect the bracket for signs of wear and replace it if it shows significant deterioration.
Improper installation: Incorrect installation can lead to various issues with the bracket’s performance.
Solution: Ensure the bracket is installed according to the manufacturer’s instructions. Double-check all connections and fastenings.
By addressing these common issues, you can maintain the proper functioning and alignment of your BMW headlight bracket.
The BMW Part Bracket Headlight Left 63126949633 is a crucial component designed to secure the left headlight in place, ensuring stability and proper alignment for optimal visibility and safety while driving.
Made from high-quality materials, it withstands various driving conditions and maintains its integrity over time. Using genuine BMW parts like this bracket helps maintain the vehicle’s performance and safety standards, providing peace of mind to drivers.
It is compatible with various BMW models from 2004 to 2010, including the BMW 525i and BMW 528i.
Regular maintenance tips include cleaning methods such as regular cleaning, polishing, and applying a protective coating to prevent oxidation and yellowing. Periodic checks should be performed to inspect for damage, check alignment, test functionality, and clean washer nozzles.
Common issues with the bracket can be addressed by ensuring proper installation, checking for loose or misaligned brackets, cracks or breaks, corrosion or rust, wear and tear, and improper installation.
