The BMW Part Registration Plate Lamp 63267165646 is a crucial component in BMW vehicles. This part, also known as the license plate lamp, is responsible for illuminating the vehicle’s license plate. It ensures that the license plate is visible at night or in low-light conditions, which is essential for legal compliance and safety.
The lamp is designed to fit various BMW models and is a direct replacement for the original part. Its importance lies in maintaining visibility and adherence to road safety regulations, making it an indispensable part of any BMW vehicle.
The BMW Part Registration Plate Lamp 63267165646 is a genuine BMW part designed to replace the original registration plate lamp. Here are the specific features and technical specifications:
Part Number: 63267165646
Supersession: 63-26-7-165-646; 63268372001
Fitment Type: Direct Replacement
Bulb Type: Halogen Lamp
Material: The lamp housing is made of durable plastic, and the reflector is coated with reflecting foil for optimal light distribution.
Weight: 0.60 pounds
Compatibility: This part is compatible with various BMW models, including the 520d, 520i, 523i, 525d, 525i, and 530i, spanning model years from 1997 to 2014.
Screwdriver (Phillips and flathead)
Socket wrench set
Trim removal tool
Electrical tape
Multimeter (optional, for testing connections)
Disconnect the Battery: Ensure the car’s battery is disconnected to prevent electrical shock.
Work in a Well-Lit Area: Proper lighting helps avoid mistakes and ensures safety.
Wear Safety Gloves: Protect your hands from sharp edges and electrical components.
Avoid Water: Keep the area dry to prevent electrical hazards.
Open the Trunk: Locate the registration plate lamp assembly at the rear of the vehicle.
Remove the Old Lamp: Use a screwdriver to remove the screws holding the old lamp in place. Carefully disconnect the wiring harness.
Install the New Lamp: Position the new registration plate lamp in place. Secure it with screws and reconnect the wiring harness.
Test the Lamp: Reconnect the battery and test the new lamp to ensure it is working properly.
Reassemble the Trunk: Once confirmed, reassemble any parts of the trunk that were removed during the process.
Ensure all screws are tightened and no loose wires are present.
Double-check the functionality of the new lamp.
By following these steps, you should be able to successfully install the BMW Part Registration plate lamp 63267165646.
Regular Cleaning: Clean the lamp housing and lens regularly to remove dirt, dust, and grime that can obstruct the light output.
Check for Corrosion: Inspect the lamp and its connections for any signs of corrosion. Clean and apply an anti-corrosion spray if necessary.
Bulb Replacement: Replace the bulb as soon as it starts to dim or burn out. Use only genuine BMW bulbs to ensure proper fit and function.
Secure Connections: Ensure all electrical connections are secure and free from damage.
Loose or damaged connections can cause the lamp to malfunction.
Protect from Moisture: Keep the lamp and its connections dry to prevent moisture-related issues. Use protective covers if the vehicle is exposed to harsh weather conditions.
Dim or Flickering Light: This can be caused by a weak or failing bulb, poor electrical connections, or corrosion.
No Light Output: This may be due to a burnt-out bulb, blown fuse, or a faulty wiring connection.
Frequent Burnouts: Frequent bulb burnouts can indicate an electrical issue, such as voltage fluctuations or a problem with the lamp socket.
Check the Bulb: Remove the lamp cover and inspect the bulb. Replace it if it is burnt out or damaged.
Inspect Electrical Connections: Ensure all connections are secure and free from corrosion.
Clean any corroded parts and reattach the connections.
Test the Fuse: Locate the fuse for the registration plate lamp in the fuse box and check if it is blown. Replace it if necessary.
Check Voltage: Use a multimeter to check the voltage at the lamp socket. Ensure it is within the specified range for the bulb.
Replace the Lamp: If the above steps do not resolve the issue, consider replacing the entire lamp assembly.
By following these maintenance tips and troubleshooting steps, you can keep your BMW registration plate lamp in good working condition and address any issues that may arise.
Genuine BMW parts like the BMW Part Registration plate lamp 63267165646 offer several advantages over aftermarket alternatives. Firstly, genuine parts are designed and manufactured to meet the exact specifications and quality standards set by BMW, ensuring superior durability. They are made from high-quality materials that are tested rigorously to withstand wear and tear, providing a longer lifespan compared to aftermarket parts.
Secondly, genuine parts ensure a perfect fit.
Since they are made specifically for your BMW model, they are guaranteed to fit seamlessly without any modifications. This eliminates the risk of compatibility issues that can arise with aftermarket parts, which may not always match the exact dimensions and design of the original part.
Lastly, genuine parts deliver optimal performance. They are engineered to work in harmony with the other components of your BMW, ensuring smooth operation and maintaining the vehicle’s overall performance.
Aftermarket parts, on the other hand, may not provide the same level of performance and could potentially lead to decreased efficiency or even damage to other parts of the vehicle.
In summary, choosing genuine BMW parts like the BMW Part Registration plate lamp 63267165646 ensures durability, a perfect fit, and optimal performance, making them a reliable choice for maintaining your vehicle.
The BMW Part Registration Plate Lamp 63267165646 is a crucial component in BMW vehicles, responsible for illuminating the license plate at night or in low-light conditions. It ensures legal compliance and safety. The lamp is designed to fit various BMW models and is a direct replacement for the original part.
To install the lamp, tools such as a screwdriver, socket wrench set, trim removal tool, electrical tape, and multimeter (optional) are required. Safety precautions include disconnecting the battery, working in a well-lit area, wearing safety gloves, and avoiding water.
Common issues with the lamp include dim or flickering light, no light output, and frequent burnouts. Troubleshooting steps involve checking the bulb, inspecting electrical connections, testing the fuse, checking voltage, and replacing the lamp if necessary.
Genuine BMW parts like the BMW Part Registration Plate Lamp 63267165646 offer several advantages over aftermarket alternatives, including superior durability, a perfect fit, and optimal performance. They are designed and manufactured to meet exact specifications and quality standards set by BMW, ensuring a longer lifespan compared to aftermarket parts.
