7146959892 – BMW Phillips Head Screw for Plastic Material: Installation and Maintenance Guide

The BMW Phillips Head Screw for Plastic Material (part number 7146959892) is a small yet crucial component used in various BMW models. This screw is specifically designed to securely fasten plastic parts, ensuring the integrity and durability of the vehicle’s assembly. Its precise fit and high-quality material help maintain the performance and aesthetics of BMW vehicles, making it an essential part for both maintenance and repairs.

Specifications

Specifications for BMW Part 07146959892 (Phillips Head Screw for Plastic Material):

• Dimensions: Not explicitly listed, but typically fits standard screw sizes for plastic applications.
• Material: Designed specifically for plastic material.
• Compatibility: Fits a wide range of BMW models from 1991 to 2020, including:
  • 1 Series: 2011 1 Series M Coupe (E82), 2008-2013 128i and 135i (E82, E88)
  • 2 Series: 2014-2020 228i, 230i, and 228i xDrive (F22, F23, F44)
  • 3 Series: 1992-1999 318i, 318is (E36), 1996-2016 328i, 1995-2018 M3
  • X Series: 2004-2020 X3, 2000-2020 X5
  • Other Models: Various models including E36, E46, E90, F30, F10, F22, F23, F25, F26, F30, F32, F33, F34, F39, F48, F80, F82, F83, F87, F90, G01, G02, G05, G07, G11, G14, G15, G20, G30, Z3, Z4, and MINI variants.

Usage

The BMW part 07146959892, a Phillips head screw for plastic material, is specifically designed to secure plastic components in various BMW models. It is used to fasten parts such as interior trim panels, underbody covers, and other plastic fixtures, ensuring they remain securely in place. This screw is essential for maintaining the integrity and appearance of the vehicle’s interior and exterior plastic elements.

Installation

Here’s a step-by-step guide to install the BMW Phillips head screw for plastic material (part number 7146959892):

1. Gather Tools and Materials:

   • Phillips head screwdriver
   • BMW Phillips head screw (part number 7146959892)
   • The plastic part where the screw will be installed

2. Prepare the Area:

   • Clean the plastic surface where the screw will be installed to ensure proper fit and function.

3. Align the Screw:

   • Position the screw in the designated hole on the plastic part. Ensure it is aligned straight to avoid cross-threading.

4. Insert the Screw:

   • Using the Phillips head screwdriver, gently start turning the screw clockwise. Apply even pressure to avoid stripping the screw head.

5. Tighten the Screw:

   • Continue turning the screw until it is snug. Do not over-tighten, as this can damage the plastic material.

6. Check the Fit:

   • Ensure the screw is flush with the surface and securely holding the plastic part in place.

7. Final Inspection:

   • Verify that the screw is properly installed and the plastic part is secure. Make any necessary adjustments.

That’s it! Your BMW Phillips head screw should now be properly installed and functioning as intended.

Maintenance

To maintain the BMW Phillips head screw for plastic material (part number 7146959892), follow these steps:

1. Regular Inspection: Periodically check the screws for any signs of wear, corrosion, or damage. Replace any screws that show significant wear to prevent failure.

2. Proper Installation: Ensure the screws are installed correctly using the appropriate tools. Over-tightening can strip the plastic material, while under-tightening can lead to loosening.

3. Clean Environment: Keep the screws and surrounding areas clean. Dirt and debris can cause wear and tear over time.

4. Lubrication: Apply a small amount of anti-corrosive lubricant to the screws to prevent rust and ensure smooth operation.

5. Avoid Harsh Chemicals: When cleaning the area around the screws, avoid using harsh chemicals that could degrade the plastic material or the screws themselves.

6. Temperature Control: Avoid exposing the screws to extreme temperatures, as this can affect the plastic material and the integrity of the screws.

By following these tips, you can ensure the longevity and performance of your BMW Phillips head screws.

The BMW Phillips Head Screw for Plastic Material

The BMW Phillips Head Screw for Plastic Material (part number 7146959892) is a crucial component used to secure plastic components in various BMW models. It ensures the integrity and durability of the vehicle’s assembly, maintaining performance and aesthetics.

The screw is designed specifically for plastic material and fits a wide range of BMW models from 1991 to 2020.

Installation Steps:

1. Gather tools and materials
2. Prepare the area
3. Align the screw
4. Insert it
5. Tighten it
6. Check the fit
7. Perform a final inspection

Regular Maintenance:

• Regular inspection
• Proper installation
• Cleaning
• Lubrication
• Avoiding harsh chemicals
• Controlling temperature

By following these steps, you can ensure the longevity and performance of your BMW Phillips head screws.