The BMW Torx screw with washer (part number 7146978618) is a crucial component used in various BMW models. This screw, along with its washer, ensures secure fastening of parts, contributing to the overall stability and functionality of the vehicle. Its design allows for precise torque application, which is essential for maintaining the integrity of the assembled parts.
Whether it’s for the interior, exterior, or mechanical components, this Torx screw plays a vital role in keeping the vehicle in optimal condition.
Part Number: 07146978618 (07-14-6-978-618)
Description: Torx screw with washer
Material: Steel
Dimensions:
Screw Length: 18mm
Screw Diameter: 6mm
Washer Diameter: 10mm
Unique Features:
Torx Head: Provides better grip and reduces the risk of stripping compared to standard screws.
Washer: Helps distribute the load of the screw and provides a smooth bearing surface.
Manufacturer: BMW
Weight: 0.20 Pounds
Fitment Type: Direct Replacement
Vehicle Compatibility: Fits various BMW models from 2006-2020
Manufacturer Warranty: Guaranteed by BMW’s factory warranty
Price: Approximately $2.85 MSRP: $3.59
Shipping: Ships in 1-3 business days
Return Policy: Returns accepted under certain conditions
The BMW Torx screw with washer 7146978618 is used in various assemblies within BMW vehicles, including securing components in the engine bay, attaching interior trim pieces, and fastening exterior body panels. It ensures a secure and vibration-resistant connection in critical areas such as the front carrier, headlight arm/holder, and various other structural and non-structural parts across multiple BMW models from 2006 to 2020.
Gather Tools and Parts: Ensure you have the BMW Torx screw with washer (part number 7146978618), a Torx driver that fits the screw, and any other necessary tools for your specific installation.
Prepare the Area: Clean the area where the screw will be installed to remove any dirt or debris. This will help ensure a secure fit.
Position the Washer: Place the washer onto the screw, ensuring it is seated properly.
Align the Screw: Position the screw and washer in the correct location on your BMW. Refer to your vehicle’s manual or the diagram for the exact placement.
Insert the Screw: Using the Torx driver, insert the screw into the hole.
Turn the driver clockwise to tighten the screw.
Tighten the Screw: Continue turning the Torx driver until the screw is securely fastened. Be careful not to overtighten, as this could damage the screw or the surrounding material.
Check the Installation: Ensure the screw is tight and the washer is properly seated. Double-check the alignment and make any necessary adjustments.
Test the Installation: Gently tug on the screw to ensure it is secure.
If it feels loose, repeat the tightening process.
Clean Up: Remove any tools and clean the area around the installation to ensure everything looks neat and tidy.
Final Inspection: Perform a final inspection to ensure everything is installed correctly and securely.
If you encounter any difficulties or uncertainties during the installation, consult your vehicle’s manual or seek professional assistance.
Inspecting, cleaning, and replacing the BMW Torx screw with washer (part number 7146978618) involves several steps:
Inspection: Check the screw for any signs of wear, corrosion, or damage. Ensure the washer is intact and not deformed. Look for any looseness or misalignment in the screw’s position.
Cleaning: Remove the screw and washer carefully.
Clean them using a mild degreaser and a soft brush to remove dirt and grime. Avoid using harsh chemicals that could damage the metal. Dry them thoroughly before reinstallation.
Replacement: If the screw or washer is damaged or excessively worn, replace it with a new one.
Ensure the new screw is the correct size and type (Torx screw with washer, ISA M6X18). Tighten the screw securely but avoid over-tightening to prevent stripping the threads.
Regular maintenance of this part will help ensure the longevity and proper functioning of your BMW vehicle.
The BMW Torx screw with washer (part number 07146978618) is a crucial component used in various BMW models, ensuring secure fastening of parts and contributing to the overall stability and functionality of the vehicle. Its design allows for precise torque application, which is essential for maintaining the integrity of assembled parts.
This Torx screw plays a vital role in keeping the vehicle in optimal condition, whether it’s for interior, exterior, or mechanical components. It features a Torx head that provides better grip and reduces the risk of stripping compared to standard screws, as well as a washer that helps distribute the load of the screw and provides a smooth bearing surface.
The BMW Torx screw with washer is used in various assemblies within BMW vehicles, including securing components in the engine bay, attaching interior trim pieces, and fastening exterior body panels. It ensures a secure and vibration-resistant connection in critical areas such as the front carrier, headlight arm/holder, and various other structural and non-structural parts across multiple BMW models from 2006 to 2020.
To install or replace this part, follow these steps: gather tools and parts, prepare the area, position the washer, align the screw, insert the screw, tighten the screw, check the installation, test the installation, clean up, and perform a final inspection. If you encounter any difficulties or uncertainties during the installation, consult your vehicle’s manual or seek professional assistance.
Regular maintenance of this part will help ensure the longevity and proper functioning of your BMW vehicle. Inspecting, cleaning, and replacing the BMW Torx screw with washer involves several steps: inspection, cleaning, and replacement. Regular maintenance is essential to prevent damage and ensure the integrity of the vehicle.
