The BMW Part Hexagon Screw for Plastic 7149110670 is a specific fastener used in various BMW vehicles. This screw is designed to secure plastic components within the vehicle, ensuring they remain firmly in place. It is commonly used in areas such as the interior trim, door panels, and other plastic fixtures.
The significance of this part lies in its role in maintaining the structural integrity and aesthetic appearance of BMW vehicles. By keeping plastic components securely fastened, it helps prevent rattling, wear, and potential damage, contributing to the overall durability and longevity of the vehicle.
The BMW Part Hexagon Screw for Plastic, part number 07149110670, is a genuine BMW component used in various BMW models from 1991 to 2024. Here are the specific features and technical specifications:
Material: Made from high-quality plastic suitable for automotive use.
Dimensions:
Length: Approximately 20 mm
Diameter: Approximately 5 mm
Hexagon Head Size: 6 mm
Unique Characteristics:
Designed for securing plastic components in the vehicle’s interior and exterior trim.
Resistant to corrosion and high temperatures.
Compatible with various BMW models, including 750eX, i7, and 440i.
The ‘BMW Part Hexagon screw for plastic 7149110670′ is used in various BMW models from 1991 to 2024. It is typically used in the following areas of the vehicle:
Rear Carrier: Secures components within the rear section of the vehicle.
Door Window Lifting Mechanism: Helps in the proper functioning of the rear window lifting system.
Trim Cover: Used to fasten trim covers, ensuring they stay in place.
HV, Ext, Circuit, Xenon: Connects and secures electrical components related to the vehicle’s lighting system.
Ornamental Elements: Used in various decorative elements within the vehicle.
This hexagon screw is a direct replacement for parts 63-12-8-357-505 and 63-12-8-353-006. It ensures reliable fastening of plastic components in multiple BMW models, including the 318i, 320i, 325i, 328i, 528i, M3, 228i, 230i, and i7.
Hexagon screwdriver (appropriate size for 7149110670)
Replacement Hexagon screw (7149110670)
Safety gloves
Safety goggles
Wear safety gloves and goggles to protect your hands and eyes.
Ensure the vehicle is turned off and the keys are removed from the ignition.
Work in a well-lit area to clearly see the installation area.
Handle tools and parts carefully to avoid injury or damage.
Locate the damaged or missing screw on the plastic part of your BMW.
Select the appropriate hexagon screwdriver that fits the screw head.
Align the screwdriver with the screw head and apply gentle pressure to avoid stripping the screw.
Turn the screwdriver clockwise to tighten the screw into place.
Ensure the screw is securely fastened but avoid overtightening to prevent damage to the plastic part.
Repeat the process for any additional screws that need replacement.
Inspect the installed screw to ensure it is properly secured and aligned.
Test the part to make sure it is functioning correctly.
By following these steps, you should be able to successfully install the BMW Hexagon screw for plastic (7149110670). If you encounter any difficulties, consider consulting a professional mechanic for assistance.
To maintain the BMW Part Hexagon screw for plastic 7149110670, follow these best practices:
Regular Inspection: Check the screw periodically for any signs of wear, damage, or looseness. This is especially important if you notice any unusual noises or vibrations from the affected area.
Cleanliness: Keep the screw and surrounding area clean from dirt, debris, and moisture. Use a soft brush or cloth to remove any buildup.
Tightness: Ensure the screw is properly tightened to the manufacturer’s specifications.
Over-tightening can cause damage, while under-tightening can lead to parts becoming loose.
Lubrication: Apply a small amount of appropriate lubricant to the screw to prevent corrosion and ensure smooth operation. Avoid using excessive lubricant that could attract dirt.
Replacement: Replace the screw if it shows signs of corrosion, stripping, or if it becomes damaged. Do not attempt to reuse damaged screws.
When to replace the screw:
Visible Damage: If the screw is visibly damaged, stripped, or corroded, it should be replaced immediately.
Loose or Missing: If the screw becomes loose or falls out, replace it to ensure the integrity of the part it secures.
After Accidents: If the vehicle has been involved in an accident, inspect and replace the screw as part of the repair process.
How to replace the screw:
Gather Tools: Ensure you have the correct replacement screw (part number 7149110670), a screwdriver or hex key, and any other necessary tools.
Remove Old Screw: Carefully remove the damaged or loose screw using the appropriate tool.
Keep track of any washers or other small parts that may come off with the screw.
Clean Area: Clean the area where the screw will be installed to remove any dirt or debris.
Install New Screw: Align the new screw with the hole and insert it. Tighten it to the manufacturer’s specified torque using the appropriate tool.
Double-Check: Ensure the screw is secure and properly tightened. Check the surrounding area for any other issues that may need attention.
Following these best practices will help maintain the integrity and functionality of the BMW Part Hexagon screw for plastic 7149110670.
The BMW Part Hexagon Screw for Plastic 7149110670 is a crucial component in maintaining the structural integrity and aesthetic appearance of BMW vehicles. It ensures that plastic components are securely fastened, preventing rattling, wear, and potential damage.
Using this genuine part contributes to the overall durability and longevity of the vehicle. Following the provided guidelines for installation and maintenance is essential to ensure proper functioning and prevent costly repairs.
Regular inspection, cleanliness, tightness, lubrication, and replacement when necessary will help maintain the integrity and functionality of the screw.
By using the correct tools and following these best practices, you can ensure that your BMW vehicle runs smoothly and efficiently.
