51148132375 – Genuine BMW Plaque: Installation, Maintenance & Troubleshooting

The BMW part number 51148132375 refers to a genuine BMW emblem used on the front and rear of various BMW models. This emblem, often called the “roundel,” is a key identifier of the BMW brand, symbolizing the company’s heritage and reputation for quality. It is designed to fit securely on the vehicle’s bonnet or boot, enhancing the car’s aesthetic appeal and maintaining brand consistency.

Specifications

BMW Part Plaque 51148132375 Specifications:

• Dimensions: Standard size for BMW emblems, typically around 82mm in diameter.
• Materials: High-quality plastic with a chrome finish.
• Compatibility: Fits a wide range of BMW models, including:
  • 2024 BMW 228i Gran Coupe, 840i, M235i xDrive Gran Coupe, M8 Competition, M850i xDrive
  • 2023 BMW 228i Gran Coupe, 740i, 840i, M235i xDrive Gran Coupe, M8 Competition, M850i xDrive
  • 2022 BMW 228i Gran Coupe, 740i, 840i, M235i xDrive Gran Coupe, M8 Competition, M850i xDrive
  • 2021 BMW 228i Gran Coupe, 840i, M235i xDrive Gran Coupe.

Installation Process

Here’s the step-by-step installation process for the BMW part plaque 51148132375:

Tools Needed:

• Flathead screwdriver
• Soft cloth or plastic trim removal tool
• Isopropyl alcohol
• Adhesive remover (if needed)
• New grommets (2 per emblem)

Installation Steps:

1. Preparation:

   • Park your car on a flat surface and turn off the engine.
   • Clean the area around the existing emblem with isopropyl alcohol to remove any dirt or grease.

2. Remove the Old Emblem:

   • Use a flathead screwdriver or a plastic trim removal tool wrapped in a soft cloth to gently pry off the old emblem.
   • Be careful not to scratch the paint. Work slowly and evenly around the emblem.

3. Clean the Surface:

   • Once the old emblem is removed, clean any remaining adhesive residue with an adhesive remover.
   • Wipe the area again with isopropyl alcohol to ensure a clean surface.

4. Install New Grommets:

   • Insert the new grommets into the holes where the old emblem was attached. Ensure they are securely in place.

5. Attach the New Emblem:

   • Align the new emblem’s pegs with the grommets.
   • Press the emblem firmly into place until it clicks securely.

6. Final Check:

   • Ensure the emblem is properly aligned and securely attached.
   • Clean the surrounding area to remove any fingerprints or smudges.

Precautions:

• Avoid using excessive force to prevent damage to the car’s paint.
• Ensure the surface is completely clean before attaching the new emblem for optimal adhesion.

That’s it! Your new BMW emblem should now be securely installed.

Maintenance Tips

Here are some maintenance tips for the BMW emblem (part number 51148132375):

1. Regular Cleaning: Use a soft cloth and mild soap to clean the emblem. Avoid abrasive cleaners that can scratch the surface.
2. Avoid Harsh Chemicals: Do not use harsh chemicals or solvents as they can damage the emblem’s finish.
3. Protect from Sunlight: Whenever possible, park your car in shaded areas to prevent UV damage and fading.
4. Waxing: Apply a layer of automotive wax to the emblem periodically to protect it from the elements and maintain its shine.
5. Inspect for Damage: Regularly check the emblem for any signs of wear or damage and replace it if necessary to maintain the vehicle’s appearance.

Following these tips will help keep your BMW emblem looking great and performing well.

Common Issues and Solutions

Here are common issues with the BMW emblem part 51148132375 and their solutions:

1. Fading or Discoloration:

   • Solution: Regularly clean the emblem with a mild soap solution and apply a UV protectant to prevent sun damage.

2. Peeling or Detachment:

   • Solution: Ensure the surface is clean and dry before applying the emblem. Use high-quality adhesive or replace the grommets if they are worn out.

3. Scratches or Damage:

   • Solution: Use a plastic polish to remove minor scratches. For severe damage, replacing the emblem is recommended.

4. Loose Fit:

   • Solution: Check and replace the grommets if they are not holding the emblem securely.

If you encounter any of these issues, addressing them promptly can help maintain the emblem’s appearance and functionality.

The BMW Part Number 51148132375: A Genuine Emblem of Quality

The BMW part number 51148132375 is a genuine BMW emblem used on various models, symbolizing the company’s heritage and reputation for quality.

It comes with standard dimensions of around 82mm in diameter and is made of high-quality plastic with a chrome finish.

The emblem fits a wide range of BMW models from 2021 to 2024 and can be installed using basic tools such as a flathead screwdriver, soft cloth, and adhesive remover.

Maintenance Tips for the BMW Emblem

Regular maintenance tips include:

• Cleaning the emblem with mild soap
• Avoiding harsh chemicals
• Protecting it from sunlight
• Waxing periodically
• Inspecting for damage

Common Issues and Solutions

Common issues such as fading, peeling, scratches, or loose fit can be addressed by following specific solutions to maintain the emblem’s appearance and functionality.