The BMW Part Bulb 63217160789, also known as the Tail Lamp Bulb – P21W/12V/21W, is a crucial component in BMW vehicles. This bulb is designed to serve multiple functions, including acting as a brake light, turn signal, and tail light. Its primary purpose is to ensure optimal visibility and safety for both the driver and other road users.
By providing bright and reliable illumination, this bulb plays a vital role in the vehicle’s lighting system, enhancing overall driving experience and safety.
Does this cover what you were looking for?
Voltage: 12V
Wattage: 21W
Compatibility: Fits BMW models including E30 M3, E36 M3, E34 M5, E39 M5, E46 M3, E53 48IS, E30, E34, E36, E38, E39, headlight-right-replacement-guide”>E46, E53 X5, E65, E85 Z4, E90, F22, F30, F31, F34, F80 M3
Gather necessary tools: You will need a new BMW Part Bulb 63217160789, a screwdriver, and possibly bulb pliers if the bulb is hard to reach.
Ensure safety: Turn off the vehicle and make sure the headlights or tail lights are cool to the touch to avoid burns.
Access the bulb: Open the vehicle’s hood or trunk to access the back of the headlight or tail light assembly.
Remove the old bulb: Twist the bulb socket counterclockwise to release it from the assembly. Carefully pull the old bulb out of the socket.
Insert the new bulb: Handle the new bulb with care, avoiding touching the glass with your fingers to prevent oil residue from causing damage. Insert the new bulb into the socket and twist clockwise to secure it.
Test the new bulb: Turn on the vehicle and test the new bulb to ensure it is working properly.
Remember to dispose of the old bulb properly and keep your hands clean during the process.
Common problems with BMW Part Bulb 63217160789 include:
Frequent Burnouts: The bulb may burn out quickly, often due to voltage fluctuations or poor electrical connections.
Dim Lighting: The bulb may not provide sufficient brightness, which can be caused by a weak electrical connection or a faulty bulb.
Failure to Light: The bulb may not light up at all, which could be due to a blown fuse, faulty wiring, or a defective bulb.
Troubleshooting tips:
Check Voltage: Ensure that the voltage supplied to the bulb is within the recommended range. Use a multimeter to check the voltage at the socket.
Inspect Electrical Connections: Examine the wiring and connectors for any signs of corrosion, damage, or loose connections. Clean and secure all connections.
Replace Fuse: If the bulb is not lighting up, check the fuse associated with the lighting circuit and replace it if necessary.
Test with Another Bulb: Replace the bulb with a new one to see if the issue persists.
If the new bulb works, the original bulb was likely defective.
Solutions:
Stabilize Voltage: Install a voltage stabilizer or regulator to ensure consistent voltage supply to the bulb.
Repair or Replace Wiring: Fix any damaged wiring or connectors. Replace any corroded or worn-out parts.
Replace Fuse: Install a new fuse if the old one is blown. Ensure the new fuse has the correct rating.
Use High-Quality Bulbs: Opt for high-quality, long-life bulbs to reduce the frequency of burnouts.
By following these troubleshooting tips and solutions, you can address common issues with BMW Part Bulb 63217160789 effectively.
Regularly inspect the bulb for any signs of damage or wear. Ensure proper installation to avoid damage to the bulb or socket. Handle the bulb with clean hands to prevent oil or dirt from causing damage.
Avoid touching the glass part of the bulb. Turn off the vehicle’s lights when not in use to extend the bulb’s lifespan. Replace the bulb promptly if it becomes dim or fails to work.
Keep the surrounding area clean and free from moisture to prevent corrosion. Use the correct voltage and wattage for replacements. Follow the manufacturer’s guidelines for maintenance and replacement intervals.
Using genuine BMW Part Bulb 63217160789 is crucial for maintaining optimal visibility and safety on the road. This bulb plays a vital role in the vehicle’s lighting system, enhancing overall driving experience and safety.
It is designed to serve multiple functions, including acting as a brake light, turn signal, and tail light. To ensure proper performance, it is essential to follow the manufacturer’s guidelines for maintenance and replacement intervals.
Regularly inspecting the bulb for signs of damage or wear, handling it with clean hands, and avoiding touching the glass part can help extend its lifespan. Proper installation and maintenance are key to optimal performance, and using high-quality bulbs can reduce the frequency of burnouts.
