The BMW Part Repair Kit is a must-have for keeping your BMW running smoothly. It fixes common problems with the windshield wiper system, like leaks and broken motors. By replacing worn-out parts, you can get your wipers working like new again, which is especially important in bad weather.
The BMW Part Repair Kit, Hose, Wiper System 61667208073 is a genuine BMW part designed to repair damaged windshield washer fluid tubing. The kit includes a 2-piece barbed fitting and a section of heat shrink tubing. This repair kit is compatible with various BMW models from 2007 to 2020, including the 2 Series, 3 Series, 4 Series, and X Series.
Preparation: Ensure the vehicle is parked on a flat surface and the engine is turned off.
Open the hood and locate the damaged washer hose.
Cut the Hose: Using a sharp knife or scissors, carefully cut the damaged section of the washer hose.
Prepare the Fittings: Take the 2-piece barbed fitting from the kit. Insert one end of the barbed fitting into the cut ends of the hose.
Apply Heat Shrink Tubing: Slide the heat shrink tubing over the repaired section of the hose.
Heat the Tubing: Use a heat gun to evenly heat the tubing until it shrinks tightly around the hose and fitting, ensuring a secure seal.
Check for Leaks: Turn on the vehicle and test the washer system to ensure there are no leaks and the system is functioning properly.
Regular Inspection: Periodically inspect the repaired hose for any signs of wear or damage.
Maintenance: Keep the washer fluid reservoir filled with windshield washer fluid to ensure optimal performance.
Replacement: If the repaired hose shows signs of further damage or leaks, replace it with a new kit to maintain the effectiveness of the washer system.
By following these detailed steps, you can successfully repair and maintain your BMW’s wiper system using the 61667208073 repair kit.
conclusion
