The BMW Part Cover, lower part centre 51117315473, is a crucial component in BMW vehicles, specifically designed to protect and enhance the aesthetics of the lower section of the vehicle’s body. This part is essential for safeguarding the underbody components from debris, moisture, and other environmental elements that could potentially cause damage.
One of the unique features of this part is its precise fitment, ensuring it seamlessly integrates with the vehicle’s existing structure. Made from high-quality materials, it provides durability and resistance to wear and tear, maintaining the vehicle’s appearance and performance over time.
Additionally, its design complements the overall look of the BMW, contributing to the car’s sleek and sophisticated exterior.
Would you like to know more about how this part is installed or its compatibility with different BMW models?
The BMW Part Cover, lower part centre 51117315473 is designed as a direct replacement for the lower cover of BMW vehicles. It is made from high-quality plastic material, ensuring durability and resistance to environmental factors. The dimensions of the part are approximately 42.8 x 9.3 x 9.7 inches (LxHxW).
This part is compatible with various BMW models, including the 2014-2020 BMW 4 Series (F32, F33, F36) and the 2017-2020 BMW 440iX.
The part number for this cover is 51-11-7-315-473, and it is also referred to as the lower cover or cover lower part center.
Flathead screwdriver
Phillips screwdriver
Trim removal tool
Socket wrench set
Torx bit set
Protective gloves
Safety goggles
Ensure the vehicle is parked on a flat surface and the engine is turned off.
Disconnect the battery to prevent any electrical accidents.
Handle all tools and parts with care to avoid damage.
Preparation:
Park the vehicle on a flat surface and turn off the engine.
Disconnect the battery to ensure safety.
Remove the Old Cover:
Use the trim removal tool to carefully pry off the old lower part cover.
Remove any screws or bolts securing the cover using the appropriate screwdrivers and socket wrench set.
Clean the Area:
Clean the area where the new cover will be installed to ensure a proper fit.
Remove any debris or dirt from the mounting points.
Position the New Cover:
Align the new lower part cover with the mounting points.
Ensure it fits properly and adjust if necessary.
Secure the Cover:
Use the screws and bolts removed earlier to secure the new cover in place.
Tighten them using the appropriate tools, ensuring they are snug but not over-tightened.
Reconnect the Battery:
Reconnect the battery to restore power to the vehicle.
Final Check:
Inspect the installed cover to ensure it is securely in place and properly aligned.
Test the cover by gently pressing on it to ensure it does not move or come loose.
Clean Up:
Remove any tools and clean up the work area.
Dispose of any old parts and packaging responsibly.
By following these steps, you should be able to successfully install the BMW Part Cover, Lower Part Centre 51117315473. If you encounter any difficulties, refer to the vehicle’s service manual or consult a professional mechanic.
Regular Cleaning: Clean the cover regularly with a mild detergent and water to remove dirt, grime, and road salt. Avoid using harsh chemicals that can damage the surface.
Waxing: Apply a good quality car wax to protect the cover from UV rays and environmental damage. Waxing also helps in maintaining the shine and preventing rust.
Inspection: Periodically inspect the cover for any signs of damage, such as cracks, scratches, or loose fittings.
Address any issues promptly to prevent further damage.
Tightening Fasteners: Ensure all fasteners and clips are securely tightened to prevent the cover from becoming loose or misaligned.
Avoid Heavy Impact: Be cautious while parking or driving in tight spaces to avoid hitting the cover with other objects. Heavy impacts can cause dents or cracks.
Professional Repairs: If the cover gets damaged, consider getting it repaired by a professional to ensure it is restored to its original condition.
Storage: If you need to store the cover for an extended period, keep it in a cool, dry place away from direct sunlight and moisture to prevent deterioration.
Follow Manufacturer Guidelines: Always refer to the manufacturer’s maintenance guidelines for specific care instructions and recommendations.
By following these tips, you can help ensure the longevity and performance of your BMW Part Cover, lower part centre 51117315473.
Cracks or Breaks: Inspect the cover regularly for any visible cracks or breaks. Replace the cover if any damage is found to prevent further issues.
Loose Fittings: Ensure all clips and fasteners are securely in place. Tighten any loose fittings to avoid the cover coming off.
Scratches or Dents: Use a soft cloth and automotive polish to buff out minor scratches or dents.
For deeper damage, consider using a body filler and repainting the affected area.
Misalignment: Check that the cover is properly aligned with the vehicle body. Adjust the positioning as needed to ensure a proper fit.
Water Damage: Clean the cover regularly to prevent water damage and corrosion. Apply a protective coating to the cover to enhance its durability.
Wear and Tear: Replace the cover if it shows signs of excessive wear and tear, such as fading or peeling paint, to maintain the vehicle’s appearance and protection.
Incorrect Installation: Follow the manufacturer’s installation instructions carefully.
If unsure, seek professional assistance to ensure the cover is installed correctly.
Compatibility Issues: Verify that the cover is compatible with your specific BMW model and year. Refer to the vehicle’s manual or consult with a dealer to confirm compatibility.
Environmental Damage: Protect the cover from harsh environmental conditions, such as extreme heat or cold, by parking the vehicle in a garage or using a car cover.
Poor Quality Replacement: Use genuine BMW parts or high-quality aftermarket parts to replace the cover. Avoid using low-quality replacements that may not fit or last as long.
The BMW Part Cover, lower part centre 51117315473 is a crucial component designed to protect and enhance the aesthetics of the vehicle’s body. It provides durability and resistance to wear and tear, maintaining the vehicle’s appearance and performance over time.
The part is compatible with various BMW models, including the 2014-2020 BMW 4 Series (F32, F33, F36) and the 2017-2020 BMW 440iX.
To install the cover, follow the provided steps, which include:
Regular maintenance is essential to ensure the longevity and performance of the cover.
Some common issues that may arise with the cover include:
To address these issues, inspect the cover regularly, tighten any loose fittings, buff out minor scratches or dents, check for proper alignment, clean the cover to prevent water damage, replace the cover if it shows signs of excessive wear and tear, follow manufacturer’s installation instructions carefully, verify compatibility with your specific BMW model and year, and protect the cover from harsh environmental conditions.
By following these maintenance tips, you can help ensure the longevity and performance of your BMW Part Cover, lower part centre 51117315473.
