The BMW Part Level Sensor 37146853753 is a crucial component in vehicle maintenance, particularly for ensuring optimal headlight performance. This sensor connects to the vehicle’s suspension and continuously monitors the ride height. By doing so, it ensures that the headlights are always correctly aligned, providing clear visibility and enhancing safety on the road.
Proper maintenance of this sensor is essential for maintaining the overall functionality and safety of the vehicle.
The BMW Part Level Sensor 37146853753, also known as the Headlight Level Sensor, is an essential component in maintaining the quality and safety of your BMW. This sensor is specifically designed to ensure that your headlights are always at the optimal level, providing you with clear visibility on the road ahead.
The sensor is used in various BMW models, including E82, E88, E90, E91, E92, E93, E60, E61, E84, E70 X5, E71 X6, and E89 Z4. It is a direct replacement for part numbers 37-14-6-763-737, 37-14-6-778-815, 37-14-6-763-735, and 37-14-6-785-207.
The sensor weighs approximately 0.90 pounds and comes with a 24-month warranty.
In terms of its role in the car’s overall performance, the Headlight Level Sensor ensures that the headlights are always correctly aimed, which is crucial for safe driving, especially at night or in poor visibility conditions. Properly aimed headlights improve visibility, reduce glare for oncoming traffic, and enhance overall driving safety.
Screwdrivers (Phillips and flathead)
Socket wrench set
Torque wrench
Multimeter (for testing connections)
Safety gloves
Safety goggles
Disconnect the battery: Ensure the vehicle’s battery is disconnected to prevent electrical shocks.
Work in a well-ventilated area: Avoid inhaling any fumes from the vehicle.
Use safety gloves and goggles: Protect your hands and eyes from potential hazards.
Follow manufacturer instructions: Refer to the vehicle’s service manual for specific safety guidelines.
Locate the existing level sensor: The sensor is typically found on the front axle.
Remove the old sensor: Use the appropriate screwdrivers and socket wrench to remove the screws and bolts securing the sensor.
Disconnect the electrical connector: Carefully disconnect the electrical connector from the sensor.
Install the new sensor: Position the new sensor in place and secure it with screws and bolts. Use the torque wrench to ensure proper tightness.
Reconnect the electrical connector: Plug the electrical connector back into the new sensor.
Test the sensor: Use a multimeter to test the sensor’s connections and ensure it is functioning correctly.
Reconnect the battery: Once the installation is complete, reconnect the vehicle’s battery.
Test the vehicle: Start the vehicle and test the level sensor to ensure it is working properly.
Verify installation: Double-check all connections and ensure everything is securely in place.
Test drive: Take the vehicle for a short test drive to ensure the sensor is functioning correctly.
I hope this helps!
Potential problems with the BMW Part Level sensor 37146853753 include:
Sensor Malfunction: The sensor may fail to accurately detect the headlight level, leading to misaligned headlights.
Wiring Issues: Damaged or loose wiring can cause intermittent or complete failure of the sensor.
Dirt and Debris: Accumulation of dirt and debris on the sensor can obstruct its function.
Water Damage: Exposure to water can corrode the sensor and affect its performance.
Solutions:
Replace the Sensor: If the sensor is malfunctioning, replacing it with a new one is the most effective solution.
Check and Repair Wiring: Inspect the wiring for any damage and repair or replace it as needed.
Clean the Sensor: Regularly clean the sensor to remove any dirt or debris that may be affecting its performance.
Protect from Water: Ensure the sensor is properly sealed and protected from water exposure.
Regular maintenance and checks:
Visual Inspection: Regularly check the sensor and its wiring for any visible damage or wear.
Clean Regularly: Clean the sensor periodically to prevent dirt and debris buildup.
Check Alignment: Ensure the headlights are properly aligned and adjust if necessary.
Test Functionality: Test the sensor’s functionality periodically to ensure it is working correctly.
By following these tips, you can help maintain the performance and longevity of your BMW’s headlight level sensor.
Genuine BMW Parts Store, AutohausAZ, ECS Tuning, Pelican Parts, FCP Euro, Schmiedmann, and eBay Motors. When choosing a supplier, consider the supplier’s reputation and reviews, warranty and return policies, shipping options and costs, price competitiveness, and product authenticity guarantees.
The BMW Part Level Sensor 37146853753 is a crucial component for ensuring optimal headlight performance and overall safety on the road. It continuously monitors the ride height, ensuring correct alignment of headlights, which improves visibility, reduces glare, and enhances driving safety.
Proper maintenance of this sensor is essential to maintain the vehicle’s functionality and safety. The sensor is used in various BMW models and comes with a 24-month warranty.
Regular checks and cleaning can help prevent potential problems such as sensor malfunction, wiring issues, dirt and debris accumulation, and water damage. By following these tips, you can maintain the performance and longevity of your BMW’s headlight level sensor.
