The BMW Part Hot-film air mass meter 13627520519 is a critical component in the vehicle’s engine management system. Its primary function is to measure the amount of air entering the engine, providing essential data to the engine control unit (ECU). This information is crucial for calculating the optimal air-fuel mixture, ensuring efficient combustion and reducing emissions.
By maintaining precise control over the air intake, this part helps optimize engine performance, improve fuel efficiency, and minimize environmental impact.
The BMW Part Hot-film air mass meter 13627520519 has the following technical specifications:
Part Number: 13627520519
Other Names: Air Mass Sensor
Manufacturer: BMW
Item Weight: 1.10 pounds
Fitment Type: Direct Replacement
Warranty: Guaranteed by BMW’s factory warranty
Supersession(s): 13-62-7-520-519
Material: Typically made from high-quality plastic and metal components
Dimensions: Approximately 5.5 x 3.5 x 2.5 inches (14 x 9 x 6.4 cm)
Performance Standards: Meets BMW’s stringent quality and performance standards for accurate air mass measurement, ensuring optimal engine performance and efficiency
The BMW Part Hot-film air mass meter 13627520519 is installed in the intake manifold of the engine. It consists of a hot-film element and a temperature sensor. As air flows over the hot-film element, it cools down.
The temperature sensor measures the cooling effect, which is directly proportional to the mass of air entering the engine. This data is sent to the engine control unit (ECU), which uses it to calculate the optimal amount of fuel to inject for efficient combustion.
Gather Tools: You will need a flathead screwdriver, a Phillips screwdriver, a 10mm socket wrench, and a new hot-film air mass meter (part number 13627520519).
Disconnect Battery: Ensure safety by disconnecting the negative terminal of the car battery to prevent any electrical short circuits.
Remove Air Intake: Use the flathead screwdriver to loosen the hose clamps and remove the air intake hose from the mass air flow sensor.
Unplug Sensor: Use the Phillips screwdriver to remove the screws securing the mass air flow sensor to the air intake manifold. Carefully unplug the electrical connector from the sensor.
Remove Old Sensor: Use the 10mm socket wrench to remove the bolts securing the mass air flow sensor to the intake manifold. Carefully remove the old sensor.
Install New Sensor: Position the new hot-film air mass meter in place and secure it with the bolts you removed earlier.
Reconnect the electrical connector.
Reattach Air Intake: Reattach the air intake hose and secure it with the hose clamps.
Reconnect Battery: Reconnect the negative terminal of the car battery.
Test: Start the car and ensure that the new sensor is functioning properly. Check for any error codes using an OBD-II scanner.
Final Check: Double-check all connections and ensure everything is secure.
Precautions:
Safety First: Always wear safety gloves and eye protection.
Avoid Static: Ensure you are grounded to avoid static discharge damaging the new sensor.
Follow Instructions: Refer to the vehicle’s service manual for specific instructions related to your model.
To maintain the BMW Part Hot-film air mass meter 13627520519, follow these steps:
Cleaning Methods:
Disconnect the battery: Ensure safety by disconnecting the battery before starting any work.
Remove the sensor: Carefully remove the hot-film air mass meter from the vehicle.
Clean the sensor: Use a specialized mass air flow sensor cleaner spray. Do not use carburetor or brake cleaner as they can damage the sensor.
Reinstall the sensor: Once cleaned, reinstall the sensor and reconnect the battery.
Signs of Potential Issues:
Check Engine Light: If the check engine light illuminates, it could indicate a problem with the air mass meter.
Poor Fuel Economy: A faulty sensor can lead to poor fuel efficiency.
Rough Idling or Stalling: If the engine idles roughly or stalls, the air mass meter might be malfunctioning.
Difficulty Starting: Trouble starting the engine can also be a sign of sensor issues.
Regular maintenance and timely cleaning can help ensure the longevity and proper functioning of the hot-film air mass meter.
Common problems with the BMW Part Hot-film air mass meter 13627520519 include rough running, poor idle, lack of performance, misfires, and higher fuel consumption. There may also be fault codes and check engine lights for air:fuel mixture, lean conditions, rich conditions, misfires, and others.
Troubleshooting steps:
Check for Fault Codes: Use an OBD II scan tool to read and clear fault codes.
Inspect the Air Filter: Ensure the air filter is clean and not clogged.
Check for Air Leaks: Inspect the intake air ducts for cracks or dry rot.
Clean the Sensor: Carefully clean the sensor with a MAF sensor cleaner.
Check Electrical Connections: Ensure all electrical connections are secure and free from corrosion.
Replace the Sensor: If the above steps do not resolve the issue, consider replacing the sensor.
The BMW part hot-film air mass meter 13627520519 is a crucial component in the vehicle’s engine management system, measuring air intake to ensure optimal combustion and reduce emissions.
The sensor consists of a hot-film element and temperature sensor, installed in the intake manifold, and measures air mass by detecting cooling effects.
Regular maintenance involves cleaning methods such as:
