High-quality parts are essential for maintaining the performance and longevity of BMW vehicles. The BMW Part Set of aluminium screws oil pump 11410426472 is a prime example of such a component. This set includes screws specifically designed for the oil pump, ensuring a secure and efficient fit.
Using genuine BMW parts like this set ensures that the vehicle operates at its optimal level, maintaining the manufacturer’s standards of quality and performance. Regular maintenance with high-quality parts not only enhances the driving experience but also preserves the vehicle’s value over time.
The BMW Part Set of aluminium screws oil pump 11410426472 consists of multiple screws made from high-quality aluminium. These screws are specifically designed for the oil pump assembly in BMW vehicles. The set includes screws with varying lengths and thread patterns to ensure a secure fit and proper function within the oil pump system.
The dimensions of the screws vary, with typical lengths ranging from 20mm to 50mm and diameters from 6mm to 10mm.
The screws are precision-engineered to match the exact specifications required for the oil pump assembly, ensuring compatibility and optimal performance.
This part set is compatible with a wide range of BMW models, including but not limited to:
BMW E60, E61, E70, E71, E82, E83, E88, E90, E91, E92, E93, F01, F02, F10, F25, and Z4 models with N52 and N54 engines.
BMW 323i, 325i, 328i, 330i, 335i, 535i, and X6 models from various years.
The set is designed to replace older part numbers such as 11-41-0-392-550 and 11-41-0-404-238, ensuring compatibility with earlier models as well.
Gather Necessary Tools: Socket set, screwdrivers, swivel socket, hexagon socket wrench, special tool 11 7 201, special tool 11 8 920, special tool 00 9 120, drill bit (6 mm), and safety gloves.
Drain Engine Oil: Ensure the engine is cool, then drain the oil using an oil drain pan.
Remove Upper Oil Sump Section: Unscrew the nuts securing the upper oil sump section and remove it.
Remove Intake Pipe: Unscrew the intake pipe and remove it.
Release Oil Pump Drive Gear: Use special tool 11 7 201 to release the nuts securing the oil pump drive gear.
Remove Oil Pump: Unscrew the screws securing the oil pump and remove it with the help of a second person.
Detach Oil Lines: Carefully detach the oil lines in the direction of the arrow.
Install New Oil Pump: Position the new oil pump and secure it with the screws.
Reattach Oil Lines: Reattach the oil lines in the direction of the arrow.
Reinstall Intake Pipe: Replace the intake pipe and secure it.
Reinstall Upper Oil Sump Section: Reinstall the upper oil sump section and secure it with the nuts.
Refill Engine Oil: Refill the engine with the appropriate amount and type of oil.
Check for Leaks: Start the engine and check for any oil leaks.
Precautions:
Safety Gear: Always wear safety gloves to protect your hands.
Engine Cool: Ensure the engine is cool before starting the installation process.
Use Special Tools: Use the specified special tools to avoid damage.
Double-Check Fastenings: Ensure all screws and nuts are properly tightened to the specified torque.
Avoid Pliers: Do not grip the oil pump drive with pliers to avoid damage.
Check for Damage: Inspect all parts for any damage before installation.
Common issues with the BMW Part Set of aluminium screws oil pump 11410426472 include:
Stripped Threads: Over-tightening or cross-threading can strip the threads in the oil pump housing.
Oil Leaks: Improper installation or worn-out screws can lead to oil leaks around the oil pump.
Screw Stretching: These screws are designed to stretch when torqued properly, but if they are reused, they can lose their tension and lead to oil pump malfunction.
Corrosion: Exposure to moisture and contaminants can cause corrosion, weakening the screws and leading to failure.
Troubleshooting tips:
Inspect for Stripped Threads: Carefully check the threads in the oil pump housing. If stripped, the housing may need to be repaired or replaced.
Check for Oil Leaks: Look for signs of oil around the oil pump area. Ensure the screws are properly torqued and not damaged.
Replace Screws if Removed: Always replace the aluminium screws with new ones if they have been removed, as reusing them can compromise the oil pump’s performance.
Prevent Corrosion: Ensure the screws are clean and dry before installation.
Use anti-corrosion lubricants if necessary.
By addressing these issues and following the troubleshooting tips, you can maintain the proper functioning of the oil pump in your BMW.
Routine Checks:
Check Engine Oil Level: Regularly monitor the engine oil level using the dipstick. Ensure it is within the recommended range.
Inspect Oil Quality: Check the oil for any signs of contamination, such as metal particles or discoloration.
Monitor Oil Pressure: Keep an eye on the oil pressure gauge or warning light. Low oil pressure can indicate issues with the oil pump.
Listen for Unusual Noises: Be alert for any knocking or tapping sounds from the engine, which could suggest oil pump problems.
Check for Leaks: Inspect the area around the oil pump for any signs of oil leaks.
Preventative Measures:
Regular Oil Changes: Follow BMW’s recommended oil change schedule using high-quality oil and filters.
Use Recommended Oil: Always use the oil type recommended by BMW to ensure proper lubrication and cooling.
Address Leaks Promptly: Fix any oil leaks immediately to prevent damage to the oil pump and other engine components.
Maintain Cleanliness: Keep the engine bay clean to prevent dirt and debris from entering the oil pump and causing wear.
Follow Maintenance Schedule: Adhere to BMW’s recommended maintenance schedule to catch potential issues early.
By following these best practices, you can help prolong the life of your BMW oil pump and ensure optimal performance of your vehicle.
The BMW Part Set of aluminium screws oil pump 11410426472 is a high-quality component designed to ensure secure and efficient fit in the oil pump assembly of various BMW models.
The set includes multiple screws made from high-quality aluminium, precision-engineered to match exact specifications required for optimal performance. Using genuine parts like this set ensures that the vehicle operates at its optimal level, maintaining manufacturer’s standards of quality and performance.
Regular maintenance with high-quality parts not only enhances driving experience but also preserves vehicle’s value over time.
The part set is compatible with a wide range of BMW models, including E60, E61, E70, E71, E72, F01, F02, F03, F04, F07, F10, F11, F12, F13, G30, and others.
Common issues include stripped threads, oil leaks, screw stretching, and corrosion, which can be addressed by inspecting for stripped threads, checking for oil leaks, replacing screws if removed, and preventing corrosion.
Routine checks and preventative measures such as regular oil changes, using recommended oil, addressing leaks promptly, maintaining cleanliness, and following maintenance schedule are essential to prolong the life of the oil pump and ensure optimal performance of the vehicle.
