The BMW Part Screw Plug 11137535106 is a genuine BMW engine oil drain plug. This component is crucial for maintaining the engine’s oil system, ensuring that oil remains within the engine and preventing leaks. It is designed to securely seal the oil pan, allowing for proper oil drainage during an oil change or when replacing the oil.
This screw plug is compatible with a wide range of BMW models, including the 1 Series, 2 Series, 3 Series, X3, X5, and more.
Its application spans various engine types, making it a versatile and essential part for BMW vehicle maintenance.
Is there anything specific you would like to know about this part?
The BMW Part Screw Plug 11137535106 has the following technical specifications:
Part Number: 11137535106
Alternate Part Numbers: 11-13-7-535-106, 11-13-1-273-093
Material: Steel
Dimensions: M12x16mm
Weight: 0.40 pounds
Seal Type: Copper seal washer (Part # 07119963151, sold separately)
Fitment: Direct replacement for various BMW models from 1975 to 2020, including 1 Series, 3 Series, X3, X5, and more.
Unique Features: Specifically designed for BMW engines with an aluminum oil pan, not compatible with plastic composite oil pans.
Wear Safety Gear: Ensure you wear safety gloves and eye protection to prevent injuries.
Work in a Safe Environment: Make sure the workspace is clean, well-lit, and free from any hazards.
Allow Engine to Cool: Ensure the engine is completely cool before starting the installation to avoid burns.
Socket Wrench Set: To remove and install the screw plug.
Oil Drain Pan: To catch any residual oil.
Torque Wrench: To ensure the screw plug is tightened to the correct specifications.
Gloves and Safety Glasses: For personal protection.
Jack and Jack Stands: If the vehicle needs to be lifted for access.
Preparation: Position the vehicle on a flat surface and ensure the engine is cool. Gather all necessary tools and safety gear.
Lift the Vehicle: If needed, use a jack and jack stands to safely lift the vehicle and gain access to the oil pan.
Drain the Oil: Place an oil drain pan beneath the oil pan drain plug. Use a socket wrench to remove the drain plug and allow the oil to drain completely.
Remove the Old Screw Plug: Locate the screw plug (part 11137535106) and use a socket wrench to remove it.
Clean the Area: Clean the area around the screw plug hole to ensure there is no debris or old gasket material.
Install the New Screw Plug: Apply a small amount of oil to the new screw plug’s threads and washer.
Insert the new screw plug into the hole and hand-tighten it.
Tighten the Screw Plug: Use a torque wrench to tighten the screw plug to the manufacturer’s specified torque (usually around 25-30 Nm).
Reinstall the Oil Drain Plug: Once the new screw plug is securely in place, reinstall the oil drain plug and tighten it to the specified torque.
Lower the Vehicle: If the vehicle was lifted, carefully lower it back to the ground using the jack and jack stands.
Check for Leaks: Start the engine and let it run for a few minutes. Check for any signs of oil leaks around the new screw plug and oil drain plug.
Dispose of Old Oil: Properly dispose of the old oil according to local regulations.
Use the Correct Torque: Over-tightening can strip the threads, while under-tightening can cause leaks.
Inspect the Washer: Ensure the washer is in good condition and properly seated to prevent leaks.
Double-Check Tightness: After the initial installation, recheck the tightness of the screw plug and oil drain plug after a short drive to ensure everything is secure.
By following these steps and tips, you can ensure a safe and successful installation of the BMW Part Screw Plug 11137535106.
To ensure the longevity and optimal performance of the BMW Part Screw plug 11137535106, follow these best practices:
Regular Inspections: Conduct routine inspections of the screw plug during every oil change. Check for any signs of wear, damage, or corrosion. Ensure the plug is securely tightened and the copper seal washer (Part # 07119963151) is in good condition.
Proper Torque: Use a calibrated torque wrench to tighten the screw plug to the manufacturer’s specified torque settings.
Over-tightening can strip the threads, while under-tightening can lead to leaks.
Cleanliness: Keep the area around the screw plug clean and free from debris. Dirt and grime can cause corrosion and compromise the integrity of the plug.
Use Genuine Parts: Always use genuine BMW parts, including the screw plug and seal washer, to ensure compatibility and reliability. Avoid using aftermarket parts that may not meet BMW’s quality standards.
Regular Oil Changes: Follow the recommended oil change intervals specified in the owner’s manual.
Fresh oil helps maintain the lubrication and cooling of the engine components, reducing the risk of damage to the screw plug.
Check for Leaks: After each oil change, monitor the area around the screw plug for any signs of oil leaks. Address any leaks promptly to prevent potential engine damage.
Replace When Necessary: If the screw plug shows signs of wear, damage, or corrosion, replace it immediately. Do not attempt to reuse a damaged plug, as this can lead to oil leaks and engine damage.
Avoid Overheating: Ensure the engine is not overheating, as excessive heat can cause the screw plug to expand and potentially lead to leaks.
Maintain proper cooling system function and monitor engine temperatures.
By following these best practices, you can help ensure the longevity and optimal performance of the BMW Part Screw plug 11137535106. Regular inspections and proper maintenance are key to keeping your BMW running smoothly.
The BMW Part Screw Plug 11137535106 is a crucial component for maintaining the engine’s oil system, ensuring that oil remains within the engine and preventing leaks. It is designed to securely seal the oil pan, allowing for proper oil drainage during an oil change or when replacing the oil.
This screw plug is compatible with a wide range of BMW models, including the 1 Series, 2 Series, 3 Series, X3, X5, and more.
To ensure optimal performance and longevity, it’s essential to follow best practices such as regular inspections, proper torque, cleanliness, using genuine parts, regular oil changes, checking for leaks, replacing when necessary, and avoiding overheating. Regular maintenance and proper installation are key to keeping your BMW running smoothly.
The screw plug has the following technical specifications:
It’s recommended to use a calibrated torque wrench to tighten the screw plug to the manufacturer’s specified torque settings.
By following these steps and tips, you can ensure a safe and successful installation of the BMW Part Screw Plug 11137535106. Regular maintenance and proper care will help extend the lifespan of this critical component, ensuring your BMW runs smoothly and efficiently for years to come.
