The BMW Part Cover, wheel housing, front right 51717033750, also known as the fender splash shield, is a crucial component in vehicle maintenance and protection. This part is designed to shield the wheel housing from debris, dirt, and water, preventing damage to the wheel well and other critical components. It also helps in reducing road noise and improving the vehicle’s aerodynamics.
Made from durable materials, this cover ensures long-lasting performance and reliability, contributing to the overall longevity and efficiency of the vehicle.
Does this cover everything you were looking for?
The BMW Part Cover, wheel housing, front right 51717033750 has the following physical characteristics, dimensions, and material composition:
Physical Characteristics: This part is designed to fit the front right wheel housing of BMW vehicles. It serves as a protective cover to shield the wheel housing from debris and moisture.
Dimensions: The part measures approximately 40 cm in length, 20 cm in width, and 5 cm in thickness.
Material Composition: It is made from high-quality plastic material, specifically polypropylene, which provides durability and resistance to impact and environmental elements.
The BMW Part Cover, wheel housing, front right 51717033750 is a component designed to protect the wheel housing area on the front right side of the vehicle. It acts as a shield, preventing debris, water, and other elements from entering the wheel housing, which houses critical components like the brake system and suspension parts.
This cover ensures that these components remain clean and dry, reducing the risk of corrosion and damage. By maintaining the integrity of the wheel housing, it helps in preserving the performance and longevity of the vehicle’s braking and suspension systems.
Additionally, it contributes to the overall safety of the vehicle by ensuring that the wheel housing components function optimally, providing reliable braking and handling.
Gather Required Tools: You will need a trim removal tool, a screwdriver set, and a torque wrench.
Ensure Safety: Disconnect the battery to prevent any electrical accidents. Wear safety gloves and eye protection.
Remove Old Cover: Use the trim removal tool to carefully pry off the old cover. Remove any screws holding it in place with the screwdriver set.
Clean the Area: Thoroughly clean the area where the new cover will be installed to ensure a proper fit.
Install New Cover: Align the new cover with the mounting points and secure it with screws.
Use the torque wrench to tighten the screws to the manufacturer’s specified torque.
Reconnect Battery: Reconnect the battery and test the new cover to ensure it is securely in place.
Final Check: Double-check all screws and connections to ensure everything is properly installed and secure.
Dispose of Old Cover: Properly dispose of the old cover according to local regulations.
Clean Up: Clean up any tools and materials used during the installation process.
Test Drive: Take the vehicle for a test drive to ensure everything is functioning correctly.
Cracks or Tears: The cover can develop cracks or tears due to impacts or debris on the road.
Troubleshooting: Inspect the cover for visible damage.
Solution: Replace the damaged cover with a new one.
Loose Fasteners: Fasteners securing the cover can become loose over time.
Troubleshooting: Check for any loose or missing screws or clips.
Solution: Tighten or replace the fasteners.
Misalignment: The cover might not align properly with the wheel housing.
Troubleshooting: Ensure the cover is correctly positioned and aligned.
Solution: Adjust the cover or replace it if it is bent or damaged.
Water Leaks: Water can seep into the wheel housing if the cover is not properly sealed.
Troubleshooting: Look for signs of water damage or rust inside the wheel housing.
Solution: Ensure the cover is properly sealed and replace it if necessary.
Wear and Tear: Over time, the cover can wear out due to exposure to the elements.
Troubleshooting: Check for signs of wear, such as brittleness or discoloration.
Solution: Replace the worn-out cover with a new one.
Incorrect Installation: Improper installation can lead to issues with the cover’s fit and function.
Troubleshooting: Verify that the cover is installed correctly according to the manufacturer’s instructions.
Solution: Reinstall the cover correctly or seek professional assistance if needed.
Debris Accumulation: Debris can get trapped between the cover and the wheel housing, causing damage.
Troubleshooting: Remove any debris or dirt from the area.
Solution: Clean the area regularly and ensure the cover is properly secured.
Corrosion: Exposure to moisture and road salt can cause corrosion on the cover.
Troubleshooting: Look for signs of rust or corrosion on the cover.
Solution: Treat the corrosion with a rust remover and consider replacing the cover if the damage is extensive.
Vibration Damage: Continuous vibrations from driving can cause the cover to loosen or crack.
Troubleshooting: Check for any signs of vibration damage.
Solution: Secure the cover properly and replace it if it is damaged.
Compatibility Issues: Using an incorrect or non-genuine cover can lead to fitment problems.
Troubleshooting: Verify that the cover is the correct part for your vehicle model.
Solution: Use a genuine BMW part that is compatible with your vehicle.
I hope this helps!
To properly maintain and care for the BMW Part Cover, wheel housing, front right 51717033750, follow these steps:
Regular Cleaning: Clean the cover regularly to remove dirt, debris, and road salt. Use a mild detergent and a soft brush or sponge to avoid scratching the surface.
Inspect for Damage: Check the cover for any signs of damage, such as cracks, tears, or loose fasteners. Replace or repair damaged parts promptly to prevent further issues.
Tighten Fasteners: Ensure all fasteners and clips are securely tightened to prevent the cover from becoming loose or falling off.
Avoid Harsh Chemicals: Avoid using harsh chemicals or abrasive cleaners that can damage the cover’s material.
Stick to recommended cleaning products.
Protect from Impact: Be cautious when parking or driving in tight spaces to avoid hitting obstacles that could damage the cover.
Check for Proper Fit: Ensure the cover is properly aligned and fits snugly. Improper fit can lead to premature wear and tear.
Follow Manufacturer Guidelines: Refer to the manufacturer’s maintenance guidelines for specific care instructions and recommendations.
By following these steps, you can help ensure the longevity and optimal performance of your BMW Part Cover, wheel housing, front right 51717033750.
The BMW Part Cover, wheel housing, front right 51717033750 is an essential component of your vehicle’s exterior, providing protection from the elements and ensuring optimal performance. Its importance cannot be overstated, as it plays a crucial role in maintaining the integrity of your vehicle’s wheel housing.
Regular cleaning and inspection are key to extending its lifespan, with mild detergent and soft brushes recommended for cleaning. Tightening fasteners regularly is also essential to prevent damage or loss. Avoid using harsh chemicals or abrasive cleaners that can damage the cover’s material.
In addition to regular maintenance, it’s crucial to protect the cover from impact by being cautious when parking or driving in tight spaces. Ensuring a proper fit and following manufacturer guidelines for care and maintenance are also vital to extending its lifespan.
The cover is susceptible to various issues such as wear and tear, corrosion, debris accumulation, vibration damage, compatibility problems, and incorrect installation. Regularly checking for signs of these issues and addressing them promptly can help prevent further damage.
To maintain the optimal performance of your BMW Part Cover, wheel housing, front right 51717033750, it’s essential to follow a regular maintenance routine that includes cleaning, inspecting for damage, tightening fasteners, avoiding harsh chemicals, protecting from impact, checking for proper fit, and following manufacturer guidelines. By doing so, you can ensure the longevity of your vehicle’s exterior components and maintain its overall performance.
