The BMW Part Drip Moulding, Left 51317045447 is a specific component designed for BMW vehicles. This part is essentially a trim piece located on the driver’s side of the windshield. Its primary function is to channel water away from the windshield, preventing it from dripping onto the driver’s side window and door.
This helps maintain clear visibility and keeps the interior of the vehicle dry during rainy conditions.
The significance of this part lies in its contribution to the overall functionality and aesthetics of the vehicle. As a genuine BMW part, it ensures a perfect fit and maintains the high standards of quality and durability expected from BMW components. It is used in various BMW models from 2004 to 2010, including the 525i, 528i, 530i, and 535i series.
Ensuring the proper installation and maintenance of this part is crucial for preserving the vehicle’s performance and appearance.
The BMW Part Drip Moulding, Left 51317045447 is designed for BMW models from 2004 to 2010. It is a genuine OEM part, ensuring a perfect fit for your vehicle. The part number for this component is 51-31-7-045-447.
The drip moulding is made from high-quality materials to withstand various weather conditions and provide long-lasting durability.
It is designed to fit seamlessly on the left side of the vehicle, protecting the door sills from water and dirt.
Preparation: Ensure the vehicle is parked on a flat surface and the engine is turned off. Gather the necessary tools: a trim removal tool, a screwdriver, and the new drip moulding part (51317045447).
Access the Drip Moulding: Open the hood of the vehicle and locate the existing drip moulding on the driver’s side of the windshield.
Remove the Old Drip Moulding: Use the trim removal tool to carefully pry the old drip moulding away from the windshield. Be gentle to avoid damaging the windshield or the vehicle’s paint.
Clean the Area: Once the old drip moulding is removed, clean the area where the new drip moulding will be installed.
Remove any dirt, debris, or adhesive residue.
Install the New Drip Moulding: Align the new drip moulding with the edge of the windshield. Press it firmly into place, ensuring it is securely attached.
Secure the Drip Moulding: Use the trim removal tool to press the drip moulding firmly into place, ensuring it is flush with the windshield. If necessary, use a screwdriver to secure any clips or fasteners.
Final Check: Inspect the installed drip moulding to ensure it is properly aligned and securely attached.
Make any necessary adjustments.
Close the Hood: Once the new drip moulding is installed, close the hood of the vehicle and ensure it is securely latched.
Test the Installation: Start the vehicle and check the new drip moulding for any issues. Ensure it is functioning properly and not obstructing any view.
Clean Up: Dispose of the old drip moulding and any packaging materials. Clean any tools used during the installation.
I hope this helps!
Common issues with the BMW Part Drip Moulding, Left 51317045447 include:
Cracks or Breaks: The drip moulding can develop cracks or breaks due to exposure to extreme temperatures, road debris, or improper installation.
Loose or Missing Clips: The clips that hold the drip moulding in place can become loose or go missing, causing the moulding to sag or detach.
Water Leakage: If the drip moulding is damaged or improperly installed, it can lead to water leakage around the windshield, potentially causing interior damage.
Wear and Tear: Over time, the drip moulding can wear out, becoming brittle and less effective at channeling water away from the windshield.
To troubleshoot these issues:
Inspect for Damage: Regularly check the drip moulding for any visible cracks, breaks, or signs of wear. Replace it if necessary.
Check and Replace Clips: Ensure that all clips are securely in place. Replace any missing or damaged clips to keep the moulding properly attached.
Seal Gaps: If there are gaps or leaks, clean the area thoroughly and apply a suitable sealant to prevent water ingress.
Professional Installation: If you are unsure about the condition of the drip moulding or its installation, consult a professional mechanic for an assessment and proper replacement.
By addressing these common issues promptly, you can maintain the effectiveness of the drip moulding and protect your vehicle from potential water damage.
Regular Cleaning: Clean the drip moulding regularly with a mild detergent and water to remove dirt, grime, and road salt. Avoid using harsh chemicals that can damage the material.
Avoid Abrasive Tools: Do not use abrasive tools or harsh scrubbers that can scratch or damage the surface of the drip moulding.
Check for Damage: Inspect the drip moulding periodically for any signs of wear, tear, or damage. Replace it if you notice any cracks or significant wear.
Protect from Extreme Weather: Park your car in a garage or use a car cover to protect the drip moulding from extreme weather conditions, such as heavy snow, ice, or intense sunlight.
Tighten Fasteners: Ensure that all fasteners and clips are securely tightened to prevent the drip moulding from becoming loose or falling off.
Use a Protective Coating: Apply a protective coating or sealant to the drip moulding to enhance its durability and resistance to environmental elements.
Professional Maintenance: If you notice any issues that you cannot address yourself, seek professional maintenance or replacement from a certified BMW service center.
By following these tips, you can help ensure the longevity and proper functioning of your BMW drip moulding.
The BMW Part Drip Moulding, Left 51317045447 is a crucial component designed to channel water away from the windshield, preventing it from dripping onto the driver’s side window and door. Its proper installation and maintenance are essential for preserving the vehicle’s performance and appearance.
The part is made from high-quality materials and is designed to withstand various weather conditions.
To ensure the longevity of the drip moulding, regular cleaning with a mild detergent and water is recommended. Avoid using abrasive tools or harsh chemicals that can damage the material. Inspect the drip moulding periodically for any signs of wear, tear, or damage, and replace it if necessary.
Common issues with the BMW Part Drip Moulding, Left 51317045447 include cracks or breaks, loose or missing clips, water leakage, and wear and tear. To troubleshoot these issues, inspect for damage, check and replace clips, seal gaps, and consult a professional mechanic if needed.
Using the genuine OEM part ensures a perfect fit and maintains the high standards of quality and durability expected from BMW components. The drip moulding is designed to fit seamlessly on the left side of the vehicle, protecting the door sills from water and dirt.
