The BMW Part Clip 51717064092 is a small but crucial component in BMW vehicles. This clip is specifically designed to secure the lower windshield cover, which protects the wiper motor and other components from debris and the elements. It ensures that the cover stays in place, maintaining the integrity and functionality of the wiper system.
Given its role, the clip is essential for the proper operation of the windshield wipers, contributing to the overall safety and performance of the vehicle. Without this clip, the wiper system could become compromised, leading to potential visibility issues and reduced effectiveness in adverse weather conditions.
The BMW Part Clip 51717064092, also known as the Cowl Grille Clip, is a small plastic clip used to secure the lower windshield cover. It is typically black in color and has a curved, hook-like shape to fit securely into designated slots on the vehicle. The clip measures approximately 2.5 inches in length and 0.5 inches in width.
This clip is usually located around the lower edge of the windshield, securing the cowl grille cover in place.
It is often found in multiples, with several clips used to ensure a secure fit.
The part number “51717064092” is usually stamped or printed on the surface of the clip for easy identification. Additionally, the clip may have a BMW logo or other identifying marks to confirm its authenticity as a genuine BMW part.
The ‘BMW Part Clip 51717064092’ is compatible with the following BMW models and years:
2004-2007 BMW 525i Sedan (E60)
2006-2007 BMW 525xi Sedan (E60)
2008-2016 BMW 528i Sedan (E60, F10)
2012-2016 BMW 528i xDrive Sedan (E60, F10)
2008-2016 BMW 535i Sedan (E60, F10)
2015-2018 BMW M3 (F80, F82, F83)
2014-2016 BMW 228i Convertible (F23), Coupe (F22)
2015-2016 BMW 228i xDrive Convertible (F23), Coupe (F22)
2017-2020 BMW 230i Convertible (F23), Coupe (F22)
2017-2020 BMW 230i xDrive Convertible (F23), Coupe (F22)
2004-2007 BMW 530i Sedan (E60)
2008 BMW 528xi Sedan (E60)
2004-2020 BMW 7 Series (F01, F02, F04)
2004-2020 BMW 5 Series (E60, E61, F10, F11)
2004-2020 BMW 6 Series (F12, F13, F06)
2004-2020 BMW 2 Series (F22, F23)
2004-2020 BMW 3 Series (F80)
2004-2020 BMW 4 Series (F83, F82)
Gather Tools: You will need a trim removal tool, a flathead screwdriver, and a new BMW Part Clip 51717064092.
Access the Clip Area: Open the hood and locate the cowl grille area where the clip is installed.
Remove Old Clip: Use the trim removal tool to gently pry the old clip out of its slot. Be careful not to damage the surrounding trim.
Insert New Clip: Align the new clip with the slot and press it firmly into place until it clicks.
Check Stability: Ensure the new clip is securely in place and the trim is properly secured.
Common Challenges:
Damaging Trim: Using too much force with the trim removal tool can damage the trim.
Misalignment: Ensuring the new clip is properly aligned can be tricky.
Finding the Right Spot: Locating the exact spot for the clip can be difficult if visibility is poor.
To maintain the BMW Part Clip 51717064092 and ensure its longevity, follow these steps:
Regular Cleaning: Clean the clip regularly with a soft brush and mild detergent to remove dirt and debris. Avoid using harsh chemicals that can corrode the material.
Inspection: Check the clip for any signs of wear or damage, such as cracks, bends, or rust. Pay special attention to the areas where the clip attaches to the vehicle.
Lubrication: Apply a light lubricant to the clip to prevent it from seizing or becoming difficult to move.
Use a silicone-based lubricant to avoid attracting dirt.
Replacement: If the clip shows significant wear or damage, replace it promptly to avoid potential issues with the wiper motor or other components it secures.
Proper Installation: Ensure the clip is installed correctly and securely. Improper installation can lead to premature wear and damage.
Environmental Protection: Protect the clip from extreme weather conditions, such as excessive heat or cold, which can cause it to deteriorate faster.
By following these maintenance tips, you can help extend the life of your BMW Part Clip 51717064092 and keep it functioning properly.
The BMW Part Clip 51717064092 is a crucial component that secures the lower windshield cover, protecting the wiper motor and other components from debris and elements. It ensures the cover stays in place, maintaining the integrity and functionality of the wiper system. Without this clip, the wiper system could become compromised, leading to potential visibility issues and reduced effectiveness in adverse weather conditions.
The clip is a small plastic component with a curved, hook-like shape that fits securely into designated slots on the vehicle. It measures approximately 2.5 inches in length and 0.5 inches in width. The part number ‘51717064092’ is usually stamped or printed on the surface of the clip for easy identification.
The BMW Part Clip 51717064092 is compatible with various BMW models, including the 525i Sedan (E60), 528i Sedan (E60, F10), and M3 (F80, F82, F83). To install or replace this clip, you will need a trim removal tool, a flathead screwdriver, and a new BMW Part Clip 51717064092.
To maintain the clip’s longevity, regular cleaning with a soft brush and mild detergent is recommended. Inspect the clip for signs of wear or damage, such as cracks, bends, or rust. Apply a light lubricant to prevent seizing or becoming difficult to move. If the clip shows significant wear or damage, replace it promptly.
The BMW Part Clip 51717064092 plays a vital role in maintaining the functionality of a BMW vehicle’s wiper system. Its proper installation and maintenance are essential for ensuring optimal performance and safety on the road.
